answersLogoWhite

0

Whole house protectors are sold in Lowes, Home Depot, electrical supply houses and on the internet such as Amazon. These things can be compromised (work like plug-in protectors) if its connection to earth is not short, direct, and to the same earth ground used by telephone, cable, and satellite dish protection. Better protection is created by upgrading its earth ground.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Natural Sciences

Will a surge protector last longer if it's unplugged from the wall outlet during an electrical storm?

Possibly, but that's kind of missing the whole point of a surge protector. The surge protector exists to protect the things that are plugged into it. If you're not using those devices anyway during the storm, sure, go ahead and unplug the surge protector... but you could also have just unplugged the devices themselves from the wall and not bought a surge protector in the first place. Also, storms don't directly damage surge protectors. Stopping surges damages surge protectors. If there's no surge, it doesn't matter if the surge protector is plugged in or not.


What would be a typical joules rating for a surge suppressor designed for home use?

Destructive surges can be hundreds of thousands of joules. A protector rated for hundreds of joules does not claim to protect from the other and typically destructive surge. In fact, a 250 joule surge will simply be converted by electronics into low voltage DC to safely power its semiconductors. A destructive surge may be 20,000 amps. So a minimal 'whole house' protector for all homes should be at least 50,000 amps. Any protector that fails on a surge did not provide effective protection. And was a potential house fire.


Is it safe to put a surge protector into a wooden box in order to hide all the cords on the counter?

I see no reason not to. As long as the surge protector is in good condition and the plugs that are connected to it have a snug fit. Most surge protectors have there own built in protection and if the whole unit is just plugged into the wall outlet the circuit breaker will trip if the surge protector faults.


Do you install whole house surge protectors?

No, I do not physically install devices. However, whole house surge protectors are typically installed at the electrical panel by a qualified electrician to protect your home's electrical system from power surges.


What unit or measurement is used to describe the amount of work a surge suppressor can do before it stops protecting the circuit?

Depends on a type of protector. Some protectors work by absorbing energy. These might be rated in joules (pronounced 'jewel'). Are typically hundreds or a few thousand joules. Another protector for all types of surges works differently. It is measured in amps. For example a typically destructive surge (lightning is one example) might be 20,000 amps. So a 'whole house' protector is minimally 50,000 amps. Protector must not stop working. If properly sized, it only degrades. Protector that is grossly undersized stops working in a manner that violated the manufacturer's specifications. And that is a potential fire. A typically destructive surge can be hundred of thousands of joules. What does that do to the first type protector that must somehow absorb that energy? Two type protectors. One rated in joules. The other in amps.

Related Questions

What is the cost of a whole house surge protector?

The cost of a whole house surge protector typically ranges from 200 to 600, depending on the brand and features.


How can I install a whole house surge protector?

To install a whole house surge protector, you should first turn off the main power supply to your house. Then, locate the main electrical panel and install the surge protector on the line side of the panel. Connect the surge protector to the grounding system and the main power supply. Finally, turn the power back on and test the surge protector to ensure it is working properly.


How can I install a whole house surge protector to protect my entire home from power surges?

To install a whole house surge protector, you need to hire a licensed electrician. They will connect the surge protector to your main electrical panel to safeguard your entire home from power surges.


How can I install a whole house surge protector in my home?

To install a whole house surge protector in your home, you will need to turn off the main power supply, locate the main electrical panel, install the surge protector unit near the panel, connect the surge protector to the panel and ground it properly. It is recommended to hire a licensed electrician for this installation to ensure it is done safely and correctly.


How can I install a whole home surge protector?

To install a whole home surge protector, you should first turn off the main power supply to your house. Then, locate the main electrical panel and install the surge protector on the line side of the panel. Connect the surge protector to the grounding system and the main power supply. Finally, turn the power back on and test the surge protector to ensure it is working properly.


Is investing in a whole house surge protector worth it for protecting all electronic devices in your home?

Investing in a whole house surge protector can be worth it for protecting all electronic devices in your home. It can help prevent damage from power surges and provide added peace of mind for your valuable electronics.


What are the benefits of installing a Siemens whole house surge protector in your home?

Installing a Siemens whole house surge protector in your home can protect your electronic devices from power surges, which can extend their lifespan and prevent damage. This can save you money on repairs or replacements and provide peace of mind knowing your devices are safeguarded.


What are the benefits of installing a Square D whole house surge protector in your home?

Installing a Square D whole house surge protector in your home can protect your electronic devices from power surges, extend their lifespan, and reduce the risk of damage or data loss. It can also provide peace of mind by safeguarding your home's electrical system and appliances.


What are the benefits of installing a whole house surge protector breaker in your home?

Installing a whole house surge protector breaker in your home can protect your electronic devices and appliances from damage caused by power surges. This can help extend the lifespan of your devices and save you money on costly repairs or replacements. Additionally, it can provide peace of mind knowing that your home is better protected against electrical surges.


Will a surge protector last longer if it's unplugged from the wall outlet during an electrical storm?

Possibly, but that's kind of missing the whole point of a surge protector. The surge protector exists to protect the things that are plugged into it. If you're not using those devices anyway during the storm, sure, go ahead and unplug the surge protector... but you could also have just unplugged the devices themselves from the wall and not bought a surge protector in the first place. Also, storms don't directly damage surge protectors. Stopping surges damages surge protectors. If there's no surge, it doesn't matter if the surge protector is plugged in or not.


What would be a typical joules rating for a surge suppressor designed for home use?

Destructive surges can be hundreds of thousands of joules. A protector rated for hundreds of joules does not claim to protect from the other and typically destructive surge. In fact, a 250 joule surge will simply be converted by electronics into low voltage DC to safely power its semiconductors. A destructive surge may be 20,000 amps. So a minimal 'whole house' protector for all homes should be at least 50,000 amps. Any protector that fails on a surge did not provide effective protection. And was a potential house fire.


Is it safe to put a surge protector into a wooden box in order to hide all the cords on the counter?

I see no reason not to. As long as the surge protector is in good condition and the plugs that are connected to it have a snug fit. Most surge protectors have there own built in protection and if the whole unit is just plugged into the wall outlet the circuit breaker will trip if the surge protector faults.