on the transmission
please I have a 1998 Saturn coupe SC 2 both power door locks out the same time 3 weeks ago. Is the fuse box for door locks under the hood or in the auto. next question could it be the switch on the door behind the lock itself, but why both out the same time? thank you very much.
The high pressure switch in a 1998 Mercury Sable's air conditioning system is typically located on the high-pressure line near the AC compressor. It is a safety feature that monitors and regulates the pressure in the system to prevent damage or leaks. You may need to consult a repair manual or seek professional help for specific instructions on locating and replacing the switch.
The main difference between a 1998 Saturn SL1 and SL2 lies in their engine configuration. The SL1 typically comes with a single overhead cam (SOHC) engine, while the SL2 is equipped with a dual overhead cam (DOHC) engine. This results in differences in power output and performance between the two models.
To fix the latch on a 1998 Saturn wagon hatchback, first, inspect the latch mechanism for debris or damage. If it’s stuck, try lubricating it with a silicone spray or WD-40. If the latch is broken, you may need to replace it by removing the interior trim panel to access the latch assembly. Ensure all connections are secure and test the latch after reassembly.
To remove the harmonic balancer on a 1998 Saturn SL2, you will need to use a harmonic balancer puller tool. First, remove any surrounding components that may impede access. Then, attach the puller to the balancer and use a wrench to slowly tighten the puller until the balancer comes off.
on the back side of the tranney were the cable hooks up
To replace the neutral safety switch on a 1998 Saturn SC2, first disconnect the battery to ensure safety. Locate the neutral safety switch on the transmission, typically near the gear selector. Remove the electrical connector and any mounting bolts securing the switch, then install the new switch in reverse order. Finally, reconnect the battery and test the switch to ensure it functions correctly.
The 1998 Ford F1 50 pickup truck neutral safety switch is located on top of the transmission. The neutral safety switch will be near the front of the transmission.
The neutral safety switch is located on the transmission, passengers side.
If it starts up in any gear, manual transmissions does not have a neutral safety switch.
the wire is Yellow coming out of the ignition switch going to the Neutural safety switch, then purple from the neutual safety switch to the starter
The Ford Neutral Safety Switch is an electronic part with the main function to stop the vehicle from getting started while in gear. The truck will not start when the switch is faulty.
It only allows starting in park and neutral and it turns on the reverse lights.
this is a GT with floor shift and 3800 engine
Under the shifter cable on top of transmission.
The Neutral safety switch is located on the back of the automatic transmission. it is quite simple to replace. It is probably easier to replace from under the vehicle, but it is accessable from the top if your vehicle is not equipped with ABS.
It only allows starting when in Park and Nuetral. It also is the reverse light switch.