answersLogoWhite

0

The fine adjustment knob is the adjuster that is used in high power. It provides better control over the depth movement adjustment of the microscope.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Natural Sciences

When you change from medium to high power what part of the microscope are you not suppose to touch?

When changing from medium to high power on a microscope, you should not touch the coarse focus knob. This knob is used to adjust the focus at lower magnifications and can cause the objective lens to crash into the slide if used at high power, potentially damaging the slide or the lens.


What happen to the light intensity when switch from low to high power?

The light intensity increases when you switch from low to high power, as more energy is being used to produce a brighter light.


The coarse adjustment knob on a microscope should never be used with the?

The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.


What power of the microscope used for endoplasmic reticulum?

A high-power microscope, such as an electron microscope, is used to visualize the endoplasmic reticulum. The intricate structure of the endoplasmic reticulum requires high magnification and resolution to observe its details effectively.


When do you use high power objective lens?

High power objective lenses are used in microscopy when fine details need to be observed. They are typically used after low power objectives to zoom in on specific areas of interest and provide higher magnification for detailed examination of cells, tissues, or other small objects. However, high power objectives have a smaller field of view and require careful focusing to avoid distortion.

Related Questions

What is a bus slack adjuster?

slack adjuster is the adjuster on the brakes of vehicles with air brakes. these are used to adjust and take the slack out of the brakes caused by usual wear on the brakes


What are power transistors?

Power transistors are transistors that are used in high-power amplifiers and power supplies.


What is high power objective in a telescope?

The high power objective is used to zoom in a little bit more than the low power ob


What are the education requirements in order to become an Auto Claims Adjuster?

To become an auto claims adjuster, the minimal education requirement is to have a high school diploma. Sometimes employers ask for a bachelor's degree.


How can I properly adjust the barrel adjuster on my brake system for optimal performance?

To properly adjust the barrel adjuster on your brake system for optimal performance, start by loosening the lock nut on the barrel adjuster. Then, turn the barrel adjuster clockwise to tighten the brake cable and increase braking power, or counterclockwise to loosen the cable and decrease braking power. Test the brakes after each adjustment to ensure they are functioning correctly. Finally, tighten the lock nut to secure the adjustment in place.


For what are high voltage power supplies typically used for?

High voltage power supplies have many uses. It is most commonly used to supply power from a device to the circuit. These are great for people who need to supply their house with power.


What name is used for a high-power circuits?

Sir!


How do you say Adjuster in Spanish?

An adjuster is a regulador. If you are referring to an insurance adjuster, it is a liquidador de seguros.


What are so uses of the element tungsten?

its used in light bulbs and high power tools that are used in high heated areas.


What name is used for a high power variable resistor?

potentiometer


What is the name used for a high power variable resistor?

Rheostat


What happens to an object when high power is used?

wha do you thinnk?