You need a magnet to separate iron from a mixture (not from a compound).
you an use a magnet to get the iron fillings out
The magnet will attract the iron, but will not attract the sulphur.
You should use a magnet to separate iron from sand. Iron is magnetic, so it will be attracted to the magnet and easily separated from the sand. A strainer would not work in this case as it would not be able to separate the two based on their magnetic properties.
One method to separate iron filings and sulfur is to use a magnet. The iron filings are attracted to the magnet and can be easily separated from the sulfur. This method takes advantage of the magnetic properties of iron filings.
Iron is a chemical element with the symbol Fe, while iron sulfide is a compound made up of iron and sulfur with the chemical formula FeS. Iron is a pure metal, while iron sulfide is a chemical compound that forms when iron reacts with sulfur. Iron sulfide is often found in nature as the mineral pyrite, also known as "fool's gold."
you an use a magnet to get the iron fillings out
Magnet
use a magnet
buy asking tino.
To obtain sulphur from a mixture of sulphur and iron fillings, you can use a magnet to separate the iron fillings from the mixture. Then, you can heat the remaining mixture to sublimate the sulphur, which will turn into a gas and can be collected by condensing it back into a solid form.
The iron and sulphur split because the iron sinks and the sulphur floats so you can separate the mixture
You can use a magnet to separate the iron fillings from the sulfur powder. The iron fillings will be attracted to the magnet, allowing you to easily separate them from the sulfur powder.
Yes you can. Since the iron filings are magnetic, but sulphur is not - you can use a magnet to separate the two elements.
If you just mix iron and sulphur together, you're still left with a pile of iron and sulphur that are distinctly separate and could be easily separated by throwing the mixture in water (iron sinks, sulphur powder floats). If they were to react together, to become iron sulphide, then they would be chemically bound to each other as a compound and wouldn't be able to be separated by physical means.
Sulphur is a pure element. Unless its mixed in with something else there is nothing to separate it from.
Iron Sulphide
Use a magnet to filter it out. Put the magnet in a plastic bag so the powder does not stick to the magnet directly. Put the powder into some water and the iron with sink and then you can get the sulphur first and then the iron. Added: The other possibility is to dissolve sulphur powder in Carbon disulphide ( CS2 ). The only disadvantage is, that this water immiscible fluid is rather stinky (rotten cauliflower) and highly flammable.