The power consumption is lower on CFL lamps. Result, you save money operating them.
Yes. You can always use a light that uses LESS than the rated capacity of the fixture, just don't use a bulb that is rated at MORE than the rated capacity. The 13 Watt CFL uses LESS than the rated 40 Watts... so it's safe. ............. Unless the light fixture is connected to a dimmer. Most florescent bulbs don't work with most dimmers. Look for a note on the dimmer like; " suitable for florescent lights" or on the bulb "suitable for use on dimmers"
A 13 watt CFL bulb is roughly equivalent to an 8 watt LED bulb in terms of light output. Look for an LED bulb with around 8-9 watts and a lumens (brightness) output of approximately 800-900 lm to match the brightness of a 13 watt CFL bulb.
All track lighting models can use CFL bulbs. The important thing is that you get the correct CFL bulb as you must get the CFL bulbs that are designed for base up use like you find in track lights, pendant lights and recessed lighting. If the track lights are dimmable you also want to be sure to get a dimmable CFL bulb.
No, it is not recommended to use a 100 watt CFL in a fixture that specifies a maximum of 25 incandescent watts. CFL bulbs have different wattage equivalencies compared to incandescent bulbs, so you should use a CFL bulb that is equivalent to or lower than the specified incandescent wattage for the fixture. Using a higher wattage CFL bulb can cause overheating and potentially pose a fire hazard.
no because it would blow up because the socket would draw 13 watt not 9 watt
When you compare a CFL (Compact Fluorescent Lamp) bulb to an LED bulb, the CFL bulb has a shorter lifespan. The CFL bulb also uses more electricity for the same brightness Also a CFL lasts longer and uses less electricity (for the same brightness) than an incandescent bulb.
It depends upon the type of light you are turning on the type of science involves ,i mean that whether CFL's or incandescent bulb. If it is CFL the the particles in the tube ionize and starts glowing and if incandescent bulb then due to the resistance of tungsten metal the filament starts glowing. Yes, it involves science.
A CFL uses 65% less energy and can reduce your power bill as well.A longer answerSince major improvements in the design of Compact Fluorescent Lamps (CFLs) from 1990 onwards, by using a CFL light bulb 80% energy of the energy can be saved compared to the energy that is needed to produce a given amount of artificial light using conventional incandescent filament bulbs.In other words, to produce the same amount of visible light, a modern CFL uses only 1/5 (one fifth) of the power that an incandescent filament bulb uses.For example, a 20 watt CFL bulb produces similar light to a 100 watt incandescent filament bulb and a 30 watt CFL matches the light output of a 150 watt incandescent filament bulb.CFLs also have a much longer useful life-span, thus avoiding the need to change them as often as incandescent light bulbs.Another opinionThere are issues with the additional power used to manufacture CFL bulbs and the toxic chemicals inside these units.But, whilst they certainly do save energy for the end user, their drawbacks are that they probably use more energy overall and their manufacture causes more pollution.
The first practical incandescent light bulb was invented by Thomas Edison in 1879. It works by passing an electric current through a thin tungsten filament, which heats up and produces light. Incandescent bulbs have been largely phased out in favor of more energy-efficient options like LED and CFL bulbs.
CFLs are more expensive in the short term, and some people suffer adverse physical reactions to them.
The CFL (compact Fluorescent Lamp) was invented in 1976 by Ed Hammer, who was a General Electric engineer. In 2002 Hammer was awarded the Edison Medal by the Institute for Electrical and Electronics Engineers for his invention. [A CFL is a energy saving light bulb]
A 240 v 14 w cfl bulb uses about 0.14 amps.
Over all, CFL light bulbs are good for the environment and they can save $. 1 CFL light bulb has 10 times the life span of a regular light bulb. 1 CFL light bulb could save enough energy to take a car from NY to San Francisco. 1 CFL light bulb uses between 50% and 80% less energy than a regular light bulb.
humphry davy
A light bulb works by passing electricity through a filament, which heats up and produces light due to the high temperature. The filament is housed in a vacuum-sealed glass bulb to prevent oxidation. As the filament glows, it emits light, providing illumination.
Yes. You can always use a light that uses LESS than the rated capacity of the fixture, just don't use a bulb that is rated at MORE than the rated capacity. The 13 Watt CFL uses LESS than the rated 40 Watts... so it's safe. ............. Unless the light fixture is connected to a dimmer. Most florescent bulbs don't work with most dimmers. Look for a note on the dimmer like; " suitable for florescent lights" or on the bulb "suitable for use on dimmers"
A 13 watt CFL bulb is roughly equivalent to an 8 watt LED bulb in terms of light output. Look for an LED bulb with around 8-9 watts and a lumens (brightness) output of approximately 800-900 lm to match the brightness of a 13 watt CFL bulb.