It's not suppose to sizzle, you need a new light switch! It might start a fire!!
When a switch makes a noise when turned on, this would indicate a quite worn switch or a switch that is not connected properly.
The audible noise is made from electricity jumping over a small gap.
This jumping does unfortunately create heat and might in worst case cause a fire.
It might be easy enough as just tighten a few screws in order to correct this.
yes,you should be able to...i think why dont you test it?
Fire gives off both smoke and light. Smoke is produced when materials burn incompletely, releasing particulate matter and chemicals into the air. Light is emitted as a result of the combustion process, with the color and intensity of the light depending on the temperature and the materials burning.
Photo-electric (PE - as opposed to the ionization type of) smoke detectors do indeed use the reduction of light energy at the receiving end to "Sound The Alarm". Whether or not this is IR energy, I can't say. Might someone else please fill this in? Thanks.
A photoelectric sensor or an ionization chamber is typically used as the transducer in a smoke detector. These components convert the presence of smoke particles in the air into an electrical signal that triggers the alarm.
Smoke is dark in color because it consists mainly of small carbon particles and other impurities released during combustion. These particles absorb and scatter light, giving smoke its dark appearance.
Short in switch or wiring. Get this repaired ASAP or you may have a fire. answer replace light switch
are we sure it is smoke not hot anti-freeze mist leaking from heater core ? if it truly is smoke you have a shorted fan switch.
check your oil level?
Yes, smoke can be condensed into a liquid form through a process called condensation. This involves cooling the smoke to a temperature where it transforms from a gas to a liquid.
the same as if you smoke regularly.
Yes you will get a dry socket you should wait about a week to a week and a half before you smoke
An air conditioner should not smell like smoke when turned on (or when turned off). I would have to suspect that the electrical insulation is burning.
What cause the hyundia gls 1999 to smoke after the car is turned off? Read more:What_cause_the_hyundia_gls_1999_to_smoke_after_the_car_is_turned_off
A photoelectric smoke detector uses a light sensor and a light source to detect smoke particles in the air. When smoke enters the detector, it scatters the light, triggering the alarm.
the smoke reflects the light to your eyes then you see the smoke as a handicap for vision
no man don't do that youll get a dry socket
You can see the path of light through smoke because the particles in the smoke scatter the light. When light enters the smoke, it hits the particles and scatters in different directions, making the path of the light visible. This effect is commonly seen in settings like laser light shows or sunbeams filtering through smoke-filled rooms.