beacause resistance is depend upon area
The earthing wire does not normally carry current.
Sulfuric acid is used in chemical earthing
One way is to use a combination of washers bigger than the hole that the bolt can tighten against. You might have to get a slightly longer bolt, but all you do is take it with you to a hardware store and match it up or get a new nut and bolt that will fit through the headboard. .
The hole in ozone layer is pretty big. It has been shrinking however.
yes but it depends how big the hole is and if you have a back up parachute
An earthing boss and earthing lug are parts of a grounding connection. An earthing boss is in a casting that allows for the drilling and tapping of hole. A earthing lug is used to bond a wire to the ground.
Chemical Earthing and Conventional Earthing are different types of earthing techniques. Conventional Earthing is based on plate earthing and pipe type earthing but Chemical Earthing on GI or Copper.
no it didn't
At very first the load to be EARTHED before polarities to protect the load and human being
Electrical earthing is classified into many types as Neutral earthing Body earthing Pipe earthing Plate earthing Chemical earthing Ground Compound Earthing
Earthing?
A fossa is a bony landmark defined as a pit or socket.
That would be a ground-fault if it occurs anywhere other than inside the service panel.
System Earthing is the earthing associated with current carrying conductor & is essential for the security of the system. Equipment Earthing is the earthing associated with non-current carrying metal work & is essential for the security of human life and property.
The ozone hole is quite big. It is as big as Australia.
only earthing can not be measure. Anyone can only measures the voltage and the current with respect to the earthing .Thus it is impossible to measure the earthing.
it is also same as earthing lugs,there is no differenence earthing lugs ang lugs earthings.