answersLogoWhite

0

because of gas in active center Neon gas worked as Active Center for He-Ne laser.to accelerate the Ne atoms very high and efficient Pumping is required. Which can only be given by Electric Discharge Pumping.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Natural Sciences

Why optical pumping cannot be used for helium neon laser?

Optical pumping is not efficient for helium-neon lasers because the energy levels involved in population inversion for the laser transition are insensitive to optical pumping. The pumping process does not efficiently promote electrons to the necessary excited state, limiting its effectiveness for helium-neon lasers.


Why electrical pumping is using for gas laser?

gas lasers do not usually lend themselves to lamp pumping because the absorption lines are typically much narrower than the usual broadband emission of the lamp. Electrical pumping of gas lasers ,on the other hand can be a fairly efficient process because the linewidth of excitation cross section of a given transition by electron impact is usually quite large


Helium neon laser ratio?

You need the gas mixture to be mostly helium, so that helium atoms can be excited. The excited helium atoms collide with neon atoms, exciting some of them to the state that radiates 632.8 nm. Without helium, the neon atoms would be excited mostly to lower excited states responsible for non-laser lines.A neon laser with no helium can be constructed but it is much more difficult without this means of energy coupling. Therefore, a HeNe laser that has lost enough of its helium (e.g., due to diffusion through the seals or glass) will most likely not lase at all since the pumping efficiency will be too low.


Which one is the lasing material in helium neon laser?

The lasing material in a helium-neon laser is a mixture of helium and neon gases. The neon gas is responsible for emitting the red laser light when excited by the helium gas.


What two gases combine to form a laser?

An example is the helium-neon laser.

Related Questions

Why optical pumping cannot be used for helium neon laser?

Optical pumping is not efficient for helium-neon lasers because the energy levels involved in population inversion for the laser transition are insensitive to optical pumping. The pumping process does not efficiently promote electrons to the necessary excited state, limiting its effectiveness for helium-neon lasers.


How is he-ne laser superior to ruby laser?

Helium neon laser is better than ruby laser or most of the four level lasers are better than three level lasers due to the following reasons: The laser output is continuous in the case of helium-neon laser. But it is in the form of pulse in the ruby laser. Ruby laser requires high power pumping source, whereas Helium-neon laser requires low power pumping source like electric discharge. Efficiency of helium-neon laser is more than ruby laser. The defects due to crystalline imperfections are also present in the ruby laser. But it is not so in the helium-neon laser.


What are the types of pumping in lasers?

A laser emits a beam of energy in the form of light. But to get energy out of a laser, we have to put some in. Depending on the type of laser, there are different ways to do this. What is important here is that the energy put into the lasing medium, the energy that is pumped into that medium to stimulate it, to excite it (the actual term), to induce it to lase, is supplied by an outside source, by a pump appropriate to that type of laser. So the pump, that thing outside the medium that stimulates it to induce it into lasing, is pumping when it is exciting the medium. Hope this was, um, coherent....


Difference between he-ne laser and ruby laser?

1.he-ne laser is gaseous state. Ruby is solid state laser. 2.he-ne laser requires electrical pumping. ruby laser requires optical pumping. 3.he-ne laser has 4 energy levels. ruby has 3 energy level. 4.he-ne laser gives continuous output. ruby laser gives output in form of pulse 5. he-ne laser is cheaper


Why you use he in helium neon laser?

helium is used for excitation of neon atoms in helium neon laser..


Why electrical pumping is using for gas laser?

gas lasers do not usually lend themselves to lamp pumping because the absorption lines are typically much narrower than the usual broadband emission of the lamp. Electrical pumping of gas lasers ,on the other hand can be a fairly efficient process because the linewidth of excitation cross section of a given transition by electron impact is usually quite large


Helium neon laser ratio?

You need the gas mixture to be mostly helium, so that helium atoms can be excited. The excited helium atoms collide with neon atoms, exciting some of them to the state that radiates 632.8 nm. Without helium, the neon atoms would be excited mostly to lower excited states responsible for non-laser lines.A neon laser with no helium can be constructed but it is much more difficult without this means of energy coupling. Therefore, a HeNe laser that has lost enough of its helium (e.g., due to diffusion through the seals or glass) will most likely not lase at all since the pumping efficiency will be too low.


Which one is the lasing material in helium neon laser?

The lasing material in a helium-neon laser is a mixture of helium and neon gases. The neon gas is responsible for emitting the red laser light when excited by the helium gas.


What two gases combine to form a laser?

An example is the helium-neon laser.


What is the ratio of He and Ne in He-Ne laser?

The typical ratio of helium (He) to neon (Ne) in a helium-neon (He-Ne) laser is around 5:1, meaning there is approximately five times more helium than neon in the laser tube. Helium serves as the primary energy source while neon provides the lasing action to produce the laser light.


Why helium is used in laser?

For power of cource


How population inversion is accomplished in laser?

by pumping electrons to higher energy orbitals.