Yes, using vinegar to clean a metal pipe can potentially cause it to rust. Vinegar is acidic and can corrode certain metals, leading to rusting over time. It's better to use a cleaner specifically designed for metal surfaces to avoid this issue.
A pipe carrying hot water will generally corrode more quickly than one carrying cold water. The higher temperature of the hot water can accelerate the corrosion process by making the metal more reactive and causing it to deteriorate faster over time.
A salt of the metal. It could be an oxide but equally, it could be a halide, carbonate, suplhate or other salt.
This is different for different metals.
It depends on how much each pipe can hold. And how long each pipe is.
Non-metal
A copper pipe would work better as a conductor than an insulator. Copper is a metal known for its high electrical conductivity, meaning it allows electricity to flow easily through it. This makes copper pipes ideal for applications where conductivity is important, such as in electrical wiring.
A copper pipe would work as a conductor because most metals like copper, they are well conductors. If you want to know an example of an insulator, you can say rubber is a good insulator.
it makes a good conductor because it is steel, but not so great as an insulator. this is simply because there is space between the fibers on the outside, and that something could come in contact with the steel wire.
The reason a water pipe squeals is because of the water rubbing against the metal of the pipe.
No no no no no
If it is a copper or metal pipe, tap the pipe gentle with a some thing metal (screw driver/small wrench ect...) If the pipe makes a echo sound it is empty, if the pipe has water in it, It will not echo. this also works with pro pain bottles and other metal objects
While filtered water has less germs pipe water has more minerals and vitamins
A copper pipe would be better as a conductor due to copper's high electrical conductivity. It would allow electric current to flow efficiently through the pipe, making it a good choice for applications where electrical conductivity is important.
It is located on th driver side. Under the motor you will see a hose coming frrom the radiator going to a metal pipe the pipe goes to the water pump housing were the metal pipe and water pump housing boltup is were the thermostat is. hope it helps
Depends on local codes and the PH of the water
purchase a threaded connector, for the PVC pipe, then purchase a metal threaded adaptor for soft pipe, see your hardware man,