0
Circular pipes are easy to fabricate and require the minimum material for a given cross section. If the liquid is under pressure, a circular cross section for the pipe holds the pressure easier and allows the stress to be distributed more or less equally around the perimeter; other cross sections will concentrate the stresses in a few areas around the perimeter.
What else can I help you with?
What is liquid hold up?
Liquid hold up refers to the proportion of a two-phase flow that is occupied by liquid. It is usually represented as a fraction of the cross-sectional area in a pipe or vessel that is filled with liquid. Liquid hold up is an important parameter in the design and operation of multiphase flow systems, as it affects the performance and efficiency of the system.
How does liquid nitrogen mand leaking pipes?
It doesn't mend the pipe. The pipe will still have a leak. However, you can use liquid nitrogen to freeze the water in a pipe and create a 'freeze block' which will prevent more liquid from getting to the leak. Once the freeze block is in place, it is much easier to repair the pipe leak.
What is a circular corasl reef called?
A circular coral reef is called an atoll. Atolls are typically ring-shaped coral reefs that encircle a lagoon partially or completely. They are often found in tropical waters.
How many one inch pipe equals for one four inch pipe for water distribution?
It would take sixteen one-inch pipes to equal the cross-sectional area of one four-inch pipe. This assumes the pipes are circular in cross-section.
Is pressure loss larger in liquid flow or gas-liquid flow?
Pressure loss is typically larger in gas-liquid flow compared to liquid flow due to the compressibility of gas. Gas-liquid flow can experience significant pressure drops due to the expansion and compression of gas bubbles within the liquid, leading to greater friction losses.
Why are pipes circular shaped?
Because that's the easiest way to make them, and the strongest. EDIT: Also the circular shape allows for a smoother flow of liquid within the pipe and less resistance.
How do you calculate economical pipe diameter for water flowing in circular pipe?
no
What are the factors affecting flow of liquid in a pipe?
The factors affecting the flow of liquid in a pipe include the pipe diameter, the viscosity of the liquid, the pressure difference across the pipe, the length of the pipe, and the roughness of the pipe walls. These factors collectively determine the flow rate and efficiency of the liquid moving through the pipe.
Can you liquid flow through a pipe?
of course liquid can flow through a pipe?
What is a faucet for controlling the flow of liquid from a pipe?
A device for controlling the flow of liquid can sometimes be a pipe.
What is sparger pipe?
simply put, a sparger pipe is a pipe designed to introduce gas into a liquid.
Difference between pipe and duct?
"Pipe" usually implies high pressure, gas or liquid. "Duct" implies low pressure, usually air. Pipes are generally round and made in standard sizes. Ducts can be any shape, any size.
How much liquid per foot in a 8 pipe?
That depends on the diameter of the pipe.
What is the colour code for a liquid pipe line and a air pipe line?
reticulated system pipe line colour code
How do you clean a pipe?
You can put a liquid pipe snake down your drain or put a hose down there
What is the liquid volume in a 6 inch pipe 1200 meters long?
The liquid volume in a 6-inch pipe 1200 meters long is: 5,782.7 US gallons.
What is liquid hold up?
Liquid hold up refers to the proportion of a two-phase flow that is occupied by liquid. It is usually represented as a fraction of the cross-sectional area in a pipe or vessel that is filled with liquid. Liquid hold up is an important parameter in the design and operation of multiphase flow systems, as it affects the performance and efficiency of the system.
