because calomel act as a reference electrode
When a thermometer bulb containing mercury is placed in hot water, the mercury inside expands, causing the level of mercury to rise. This expansion of mercury is used to measure the increase in temperature accurately.
Not the pH-meter, but the electrode.
The metal strips are called electrodes. The positive electrode is known as the anode, and the negative electrode is called the cathode. They are used to conduct electricity through the electrolyte solution to facilitate the electrolysis process.
When wood is placed in mercury, nothing significant will happen as mercury is a relatively inert metal and will not react with the wood. The wood will simply float on the surface of the mercury due to the density difference between the two materials.
The distance of an earth electrode from a building typically depends on the design of the grounding system. As a general guideline, the electrode should be placed at a distance where it can effectively dissipate electrical charges and provide a low-resistance path to ground. This distance may vary depending on factors such as soil resistivity, building size, and electrical system requirements. Consulting relevant standards and regulations can help determine the appropriate distance for a specific application.
It consists of tube in the bottom of which is a layer of mercury ,over which is placed a paste of Hg+HgCl2.The remaining portion of cell is filled with a solution of normal or decinormal or saturated solution of KCl. a platinum wire dipping into the mercury layer is used for making electrical contact. the side tube is used for electrode is formulated as;Hg,Hg2Cl2,KCl. the electrode can be coupled with the hydrogen electrode of unknown pH.
The electrode was placed in the Chemistry lab. This is the sentence that uses the word electrode.
ll
right arm
An electrode
When a thermometer bulb containing mercury is placed in hot water, the mercury inside expands, causing the level of mercury to rise. This expansion of mercury is used to measure the increase in temperature accurately.
Not the pH-meter, but the electrode.
The metal strips are called electrodes. The positive electrode is known as the anode, and the negative electrode is called the cathode. They are used to conduct electricity through the electrolyte solution to facilitate the electrolysis process.
Gold is a higher density than Mercury so it will sink if placed into a container of mercury.
When wood is placed in mercury, nothing significant will happen as mercury is a relatively inert metal and will not react with the wood. The wood will simply float on the surface of the mercury due to the density difference between the two materials.
Electrode patches will be placed near or on the right arm, right leg, left arm, left leg, and the center left side of the chest. The cable will be connected to the electrode patches
yes, in fact they are used for a type of Voltaic battery.