0
What else can I help you with?
What is Collector Emitter saturation voltage?
Collector-emitter saturation voltage refers to the voltage drop across the collector-emitter junction of a transistor when the transistor is in saturation mode. It is the minimum voltage required to keep the transistor in saturation, where the transistor is fully turned on and conducting maximum current.
What is a Darlington transistor composed of?
The darlington configuration is two transistors connected in such a way that the gain (hFe) of the pair is higher than either transistor taken individually. The two collectors are connected together, and used as the collector of the pair. The base of the first transistor is the base of the pair. The emitter of the first transistor is connected to the base of the second transistor. The emitter of the second transistor is the emitter of the pair. Sometimes there is a resistor between the second base and the second emitter, so as to stabilize the pair in certain conditions. Typically, you multiply hFe's in darlington configuration, so if each transistor had an hFe of, say, 100, then the hFe of the pair would be 10,000.
Please Suggest equivalent transistor for AC 128.but it should not germanium transistor?
You can consider using the silicon transistor 2N3904 as an equivalent for the AC128. The 2N3904 is a general-purpose NPN transistor commonly used in various amplifier and switching applications. Remember to check datasheets and specifications to ensure compatibility with your circuit requirements.
What does SBDT stand for electrically?
SBDT stands for Schottky Barrier Diode Transistor, which is a type of semiconductor device that combines the functions of a Schottky diode and a bipolar transistor in a single package.
What do you mean by base-spreading resistance?
Base-spreading resistance refers to the resistance that exists in a bipolar transistor due to the spreading of the base current into the collector region. This resistance can limit the transistor's high-frequency performance and impact its overall efficiency. Reducing base-spreading resistance is important for improving the speed and performance of a transistor.
What is Si transistor?
A silicon transistor is a transistor made of silicon.
Is active is a cutoff region of transistor?
The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.
What is the purpose of the Unijunction Transistor?
A Unijunction Transistor is a transistor that acts solely as a switch.
What are the Similar transistor for 221334 PNP transistor?
Similar to a 2N3906 PNP transistor
How does a transistor behaviour?
how does a transistor behaviour
What is rt in electronics?
I believe that is resistor transistor technology TTL transistor transistor logic
Different between power transistor and transistor that used in small signal?
Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.
How do you use 'transistor' in a sentence?
I can give you several sentences.I bought a transistor radio.The transistor amplified the signal.We studied the transistor in science class.
Are Tip0ff0401 transistor synonym's to 2N3055 transistor?
no is not !
What is darlington configuaration?
A Darlington pair uses two transistors connected to behave as a single transistor with a very high current gain (beta). Transistor-1 has its collector connected to the collector of transistor-2. Transistor-1 has its emitter connected to the base of transistor-2. The base of transistor-1 with the emitter and collector of transistor-2 is used as a single transistor.
How do you check transistor faulty or not?
the best way is to compeair the data sheet of that transistor to the readings of that transistor. . . . .and u can get the readings of that transistor by using a fungction genrator and a c.r.o
What does the base do in a transistor?
It depends on the transistor, you just have to look at the data sheet for the transistor.
