0
What else can I help you with?
Propane Heaters?
form_title= Propane Heaters form_header= Stay warm with a propane heater. What size heater do you need?*= _ [50] What is the square footage of your home?*= _ [50] Will you heat your entire house with propane?*= () Yes () No
Can you use a propane gas heater on natural gas?
No, propane gas heaters are designed to operate on propane gas, while natural gas heaters are designed to operate on natural gas. They require different gas pressures and safety mechanisms specific to each gas type. Using a propane gas heater with natural gas can be dangerous and may damage the heater.
Natural gas water heater was hooked up to propane by mistake it was replaced with a propane unit does that damage the natural gas water heater for use with natural gas?
Yes, using a natural gas water heater that was mistakenly connected to propane may damage its components and make it unsafe for use with natural gas. It's best to replace it with a new unit designed for the correct type of gas to ensure safety and proper operation.
Does an electric heater do the opposite of a thermocouple?
Oh honey, bless your heart for asking. An electric heater and a thermocouple are like two peas in a pod... if that pod was a dysfunctional family. They both generate heat, but one does it by converting electrical energy while the other does it by measuring temperature differences. So, in short, they're not really opposites, just different ways to warm things up.
Is a propane space heater cost effective as a supplemental heat?
Yes, a propane space heater can be cost-effective as a supplemental heat source because propane tends to be more efficient and less expensive than electricity. However, the overall cost-effectiveness will depend on factors such as the price of propane in your area, the size and insulation of your space, and how often you use the heater.
How can I test a thermocouple on a water heater to ensure it is functioning properly?
To test a thermocouple on a water heater, you can use a multimeter to measure the voltage output. Disconnect the thermocouple from the control unit and place the multimeter probes on the thermocouple terminals. A functioning thermocouple should produce a voltage reading within the expected range. If the reading is outside this range, the thermocouple may need to be replaced.
How do I replace the thermocouple on a gas water heater?
To replace the thermocouple on a gas water heater, first turn off the gas supply and water heater. Locate the thermocouple near the pilot light and unscrew it from the control valve. Install the new thermocouple by screwing it into place and reassemble the water heater. Finally, turn the gas supply and water heater back on to test the new thermocouple.
What if your water heater will not light on after trying once?
Sometimes it can take up to TWO MINUTES for the thermocouple to take effect ( proof of flame) If the flame does not stay on the thermocouple should be replaced by a qualified licensed plumber
Where can one find fuel for a propane heater?
Propane for a heater can be purchased at hardware stores, gas stations with propane refill stations, home improvement stores, and propane dealers. They typically sell propane in refillable tanks or disposable cylinders.
What is the process for replacing a Honeywell water heater thermocouple?
To replace a Honeywell water heater thermocouple, first turn off the gas supply and water heater. Remove the access panel and locate the thermocouple. Disconnect the old thermocouple and install the new one in the same position. Reassemble the access panel and turn on the gas supply and water heater to test the new thermocouple.
Need help about force heater why wont the heater stay running when the blue button is reslease after 30 sec?
You might have to try pushing the button for longer, or you might have a bad thermocouple.
What is the function of a thermocouple in a gas heater?
A thermocouple in a gas heater is a safety device that detects if the pilot light is on. If the pilot light goes out, the thermocouple shuts off the gas supply to prevent a dangerous gas leak.
Will a portable propane tank operate a tankless water heater?
As long as the heater is made for propane.
Why does my water heater won't stay lit?
Your water heater may not stay lit due to issues with the thermocouple, gas supply, or pilot light. These components may need to be cleaned, adjusted, or replaced to ensure the water heater stays lit.
How can I compare prices on a propane heater?
I want to buy a heater but I want to compare prices first. What are some stores that sell a propane heater?
How much propane will a 400000 BTU pool heater use?
The amount of propane a 400,000 BTU pool heater will use depends on factors like the heater's efficiency and the temperature you desire. On average, a 400,000 BTU pool heater can consume around 4-5 gallons of propane per hour when running at full capacity.
What is the function of a heater thermocouple in a heating system?
A heater thermocouple is a safety device that detects if the pilot light in a heating system is lit. If the pilot light goes out, the thermocouple shuts off the gas supply to prevent a dangerous gas leak.
