Probably because you are either drawing too much current or you have a ground fault. If your ground fault breaker is tripping, or if you have a ground fault receptacle is tripping then you have too much circulating current through your neutral. There are many factors to consider there.
Provide more information about what is on the pool's circuit and we can explore the options.
The circuit would be protected up to 8 amps before the breaker would trip. Any more that 8 amps and the circuit would open and shut the circuit off.
Circuit breaker or switch
It is a relay or switch problem. A circuit breaker or fuse won't keep a light on.
Don't understand this question. If the breaker is on, then the dryer would function normally, if the breaker your are referring to is the one for the dryer. If the breaker is off then no function. A dryer runs on 220.
Generally circuit breaker is not designed to trip off in the event of lightning. The system has lightning arrestors which reroute the lightning effect to earth instantly. If there are no lightning arrestors then the equipment are likely to fail upon a lightning strike.
There are two conditions that would cause a breaker to trip off. One is an overload of the circuit and the other is a short circuit on the circuit. The heating element within the breaker is what monitors for circuit overloads.
The circuit would be protected up to 8 amps before the breaker would trip. Any more that 8 amps and the circuit would open and shut the circuit off.
A circuit breaker does not give off amperage. A circuit breaker allows a flow of current up to the rating of the breaker. Any current higher than that of the breaker's rating will open the breaker's contacts and stop the flow of current.
Circuit breaker or switch
The circuit breaker resets itself after it cools off, unless the breaker is broken.
Turn the power off and call an electrician.
The headlight circuit is protected by a self-resetting circuit breaker. Something in the circuit is drawing too much power and the breaker is cycling on and off.
It is a relay or switch problem. A circuit breaker or fuse won't keep a light on.
Yes. It's totally fine just tuck them out of the way and cap off separately. It would be impossible to pull that wire out as its probably stapled off inside the wall
Does it run for a brief period then shut off? Could be a capacitor getting ready to fail. Could be getting hot. Is it tripping the circuit breaker?
Most automotive circuit breakers reset themselves after they cool off. Some bigger trucks use circuit breakers that are reset manually. They have a button you push in to reset the breaker after it has cooled off.
Go to your distribution panel and shut off the breaker that you think is the circuit in question. If the circuit becomes de-energized then the breaker you just turned off feeds that circuit. Look on the handle of the breaker and the number you see is the amperage of that circuit. <<>> Determination of a 15 or 20 Ampere circuit is normally indicated by a combination of a 20A breaker and a 20A dedicated outlet. A 15A circuit normally has multiple outlets; not typical in a 20A circuit.