ni99a you sleep.... you needa equalizer or a bigger amp. id go with 1000 watt for now to bang them h03z.
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
There are zero amps in a 300 watt bulb. Watts are the product of amps times volts. W = A x V. To find amperage use the equation A = W/V. If you find the voltage of the 300 watt bulb uses, divide the wattage by the voltage and it will give you the amps of a 300 watt bulb.
It is not recommended to replace a 350 watt power supply with a 300 watt power supply, as the lower wattage may not provide enough power for your components. It's best to match or exceed the wattage of the original power supply to ensure proper functionality of your system.
A 300 watt audio system means it has a peak power of 300 watts but the average power might be only a fraction of that, perhaps 5-10 watts. So it might run off a car battery, with an inverter to supply the correct voltage if needed. <<>> A 300 watt public address sound system will operate very nicely from as small as a 500 watt AC generator. A 1000 watt generator will give you more capacity if there are other devices that need powering.
A 300 watt bulb requires a circuit breaker of at least 2.5 amps. This can be determined by dividing the power (300 watts) by the voltage (120 volts). However, considering normal breaker sizes, a 5 amp breaker would be sufficient for a 300 watt bulb.
300 hundred -- tens make 300.
three 300 x 10 = 3,000 = 1,000 x 3
Yes, 30 tens is the same thing as 300.
To convert hundreds to tens, you multiply the number of hundreds by 10. Therefore, 300 hundreds is equal to 300 × 10, which equals 3,000 tens.
30 tens equates to 300.
There are 30.6 tens in 306.
Its the same.
5
It is worth 300.
my answer is 300
300 of them.
None.