I think you are asking how do you fix or replace one breaker on a double pole breaker? Most if not all double breakers have a connector on the switch so that they both trip at the same time. They are also joined together in the body of the breaker. You have to change both of them. If that's not your question, please explain further.
You probably blew the breaker for the lights. While usually the lights and outlets in a room are on the same breaker, it isn't always done that way. And you may have blown the light bulbs in the lights.
If it is half the house, that implies the main breaker or the line coming in. Sometimes, double breakers will trip one of them and not the other. It looks like it is still on. Try flipping the breaker off and back on. If you feel comfortable doing it, open up the panel and check each breaker to see if current is getting through them. Just a two prong test light will tell you this. Start on the main, it may be that one of the lines coming in is dead. Looking at the question, you blew a fuse but the breaker does not show a blown fuse. You shouldn't have both in the same circuit. If you have screw in fuses there should be 2 large Buss fuses at the top of the panel. One of these could be blown. These have to be checked with a tester, there is no way to tell just by looking.
Cause you blew the fuse, The switch may not be off but there is a break somewhere in you circuit and will not work. If your circuit isn't working and all the switches are closed (on) You probably have a series circuit. meaning one wire is connecting all your electric currents and keeping it flowing. But if you had a parallel circuit you would have lights, so if your still wondering why your lights aren't on? you probably need to by new wires/circuits or just replace the whole thing.
There are tons of volcanoes that blew up!!
The adjective in the phrase "the cold wind blew snow and dust across the road" is "cold." It describes the noun "wind," indicating its temperature or characteristic.
Usually it means to blow it, it broke - you need to flick a breaker or replace it as it blew.
You probably blew the breaker for the lights. While usually the lights and outlets in a room are on the same breaker, it isn't always done that way. And you may have blown the light bulbs in the lights.
I think there is blew
I replace alot of ignition switches in these things. And clock springs.
If it is half the house, that implies the main breaker or the line coming in. Sometimes, double breakers will trip one of them and not the other. It looks like it is still on. Try flipping the breaker off and back on. If you feel comfortable doing it, open up the panel and check each breaker to see if current is getting through them. Just a two prong test light will tell you this. Start on the main, it may be that one of the lines coming in is dead. Looking at the question, you blew a fuse but the breaker does not show a blown fuse. You shouldn't have both in the same circuit. If you have screw in fuses there should be 2 large Buss fuses at the top of the panel. One of these could be blown. These have to be checked with a tester, there is no way to tell just by looking.
The fuse is located on the drivers side kick panel. I believe it's a 7.5 Amp. Hope this helps.
due to the heat a circuit breaker blew at the sound board cutting out the speakers. it took a min to find which one caused it and that's why there was no sound
You blew it means you failed.
A homophone for blew is Blue.
The wind blew down that old tree. He blew out the candles on the cake.
Blew is correct.
The homonyms of "blew" are "blue" and "blew." "Blue" refers to a color, while "blew" is the past tense of the verb "blow."