0
Cause you blew the fuse, The switch may not be off but there is a break somewhere in you circuit and will not work. If your circuit isn't working and all the switches are closed (on) You probably have a series circuit. meaning one wire is connecting all your electric currents and keeping it flowing. But if you had a parallel circuit you would have lights, so if your still wondering why your lights aren't on? you probably need to by new wires/circuits or just replace the whole thing.
What else can I help you with?
How do you wire flood lights to existing lights?
You would need to check for other lights on the same circuit or switch, but it would seem to me that you have power coming into the box (black and white) and a power out going to another box or light. You would use wire nuts to connect the black and white wires from your floodlight to the existing ones.
How do i install a dimmer switch for light 3 locations?
To install a dimmer switch for lights controlled from three locations (also known as a three-way dimmer), first, turn off the power at the circuit breaker. Use a three-way dimmer switch compatible with your existing three-way switches, and then connect the dimmer to the common terminal and traveler wires from the other switches according to the manufacturer's instructions. Ensure all connections are secure, attach the switch to the electrical box, then reinstall the other switches. Finally, turn the power back on and test the dimmer functionality from all locations.
Can you terminate a 110 circuit and a 220 circuit in one box?
No, do not put terminate 2 different voltages in one box.
Will lights short circuit with too many watts?
the slightly higher wattage shouldnt short your lights. the room will just pull a little more power from your fuse box so keep an eye on that and use 60 watt bulbs next time.
Can you splice a switch from a switch for a different light?
Answer for USA, Canada and countries running a 60 Hz supply service.You can if the "hot" wire comes from the distribution panel or from an unswitched source directly to the switch box. The switch box has to be a two gang box to hold both switches. The "hot" wire is pigtailed to two six inch pieces of wire. These two feeds are then connected to the top terminal of the switches. The switches are now in parallel with a common feed. The bottom terminals of the switches are then connected to the appropriate lighting loads.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
How can I wire 3 light switches in one box using a diagram?
To wire 3 light switches in one box, you will need to connect the power source to the switches and then connect the switches to the lights. Use a diagram to show the wiring connections for each switch and the lights.
How is a circuit breaker panel wired?
how to connect cables to switches 240 box
What are switches in a circuit box called?
Generally relays or contactors If you are talking about an electric panel in your house, they are called breakers.
How do you fix a blown fuse?
You can easily replace it but you need to know why it blew in the first place. All fuses are marked on the fuse box or in the drivers manual as to which circuit they protect. Determine which circuit that blown fuse protects and inspect that circuit for troubles.
Dash lights dome lights and trunk lights won't work 2000 Cavalier are they all on the same circuit any suggestions?
check the fuse box for a blown fuse.
You step on the brake when the directional is on and all the lights flash is there a short in the lights or the fuse box?
If you have a plug for trailer lghts it is probably a short circuit in the socket.
When it rains your radio your heater indoor tail and brake lights do not work Is the problem your relay switches And if so how do you find which one it is If it is not the relay switches What is it?
Sounds like water ingress, possibly in the fuse box area.
Why are the 1999 Plymouth breeze brake lights not working?
check your fuse box. That fuse might have short circuit
How do you light up all the lights in mission 6?
To light up all the lights in mission 6, you need to carefully plan your moves and use the switches strategically to create paths that will turn on all the lights. Start by identifying the order in which you need to toggle the switches to ensure all lights are illuminated. Remember to pay attention to the connections between the switches and the lights to solve the puzzle efficiently.
Is it safe to have a 100 amp fuse in the meter box and only 60 amp rated wiring running from it to the consumer box?
No if the load on the consumer box (circuit breaker panel) were to exceed 60 amps the wire would burn before the fuse blew
Why are the turn signals and hazard lights not working on a 1992 S10 Blazer fuses are okay?
Check your relay switches that should be located near the fuse box.
Where is the fuse located on a 91 Astro van if after replacing the switch on the dash that controls the inside lights it blew the fuse?
It would be either in the fuse box ot under the hood.
