Ohsen fd0723 press c button for more than 3 secs until secs hrs or mins flash then press a and these will increment by 1 press c to mov onto next hr mins or secs press b and set
To set the time on an Ohsen AD0930 watch, first, pull out the crown (the small knob) to the second position. Then, turn the crown to adjust the hour and minute hands to the desired time. Once set, push the crown back in to finalize the settings. Make sure to check if the watch has a 12-hour or 24-hour format, depending on your preference.
Mode refers to the current set of functions. For example, on a digital watch, in time-setting mode, a specific button will change the hour; change the watch to stop-watch mode and that button might start the timing.
To change your Shhors Lego watch from 24-hour clock mode to 12-hour clock mode, locate the mode or set button on the watch. Press and hold this button until the display starts to blink, then use the adjustment buttons to toggle between the 12-hour and 24-hour formats. Once you’ve selected the desired format, press the mode or set button again to confirm your choice. Check the display to ensure the time is now in the desired format.
you press mode button for two seconds to set the time to set the hour press adj to set the hour press st/stp once to move to minutes press adj to set the minutes this press mode to go back to the time you press mode button for two seconds to set the time to set the hour press adj to set the hour press st/stp once to move to minutes press adj to set the minutes this press mode to go back to the time
It's actually pretty simple! There should be 4 buttons on your digital watch otherwise it may not work: Mode, Light, Start/Stop, Set. 1st. Click SET 2nd. Click both SET & MODE If it doesn't work that instant, try clicking both SET & MODE a few more times. And it should work the other way around, to change your digital watch from 12 hour to 24 hour.
you press mode button for two seconds to set the time to set the hour press adj to set the hour press st/stp once to move to minutes press adj to set the minutes this press mode to go back to the time you press mode button for two seconds to set the time to set the hour press adj to set the hour press st/stp once to move to minutes press adj to set the minutes this press mode to go back to the time
To set the time on an Ozark Trail survival watch, start by locating the mode button, typically found on the side of the watch. Press and hold the mode button until the time-setting feature activates. Use the adjust buttons to set the hour and minute, then confirm your settings by pressing the mode button again. Finally, ensure the watch is in normal mode to see the updated time.
To set an alarm on the Accurist MB702S watch, press and hold the "Mode" button until the alarm setting mode activates. Use the "Adjust" button to select the hour, then press "Mode" to move to the minutes and adjust accordingly. Once you have set the desired time, press "Mode" again to confirm and exit the setting mode. Your alarm is now set and will sound at the specified time.
To set a Mudder watch to military time, first, locate the mode button on your watch. Press and hold the mode button until the time settings appear. Use the adjust button to change the time format from standard to military (24-hour) time, then save the settings by pressing the mode button again. Make sure to double-check the hour display to ensure it's set correctly.
To set an E-Howard atomic watch, first ensure the watch is in the correct time zone setting. Press the mode button to enter the time-setting mode, then adjust the hour and minute using the designated buttons. Once the time is set, exit the setting mode, and the watch will synchronize with atomic time signals. Finally, confirm that the watch displays the correct time after synchronization.
To turn off the hour chime on a Marea watch, locate the mode button on the side of the watch. Press and hold this button until you enter the settings mode, then navigate to the chime or alarm setting. Once you find the hour chime option, set it to 'off' or 'disable,' and confirm your selection. Finally, exit the settings mode to save your changes.
Press the mode button until alarm function shows now press and holdthe set button until hour flashes now press adjust to set th hour press the mode buton to move to the minutes press adj to set minutes press set to close