answersLogoWhite

0

well, first im going to tell you teacher you are cheating. get a life and learn somthing

User Avatar

Benny Wuckert

Lvl 10
3y ago

What else can I help you with?

Continue Learning about Other Engineering

What are the 3 types of simple machines?

Are you looking for the types of simple machines or examples of each one? The types are: 1. wheel and axle 2. lever 3. pulley 4. screw 5. wedge 6. inclined plane An example of a wheel and axle is a wheelbarrow and a hamster wheel. A lever is a human arm and a hammer (which is also a wedge). A pulley is a flag pole and the string you use to pull on the blinds. A screw is a slinky and a literal screw. A wedge is a carpenter's plane (a tool carpenters and cabinent makers use to smooth their wood), knitting needles, a chisel, a hatchet, and so on. An inclined plane would be a ramp, slide, or hill.


What is the term for a tool that makes work easier by changing the size or direction of a force?

The term for a tool that makes work easier by changing the size or direction of a force is "simple machine." Simple machines are fundamental mechanical devices that allow us to multiply or redirect the force applied to accomplish tasks more easily. There are six types of simple machines: **Lever:** A lever consists of a rigid bar (lever arm) that rotates around a fixed point called a fulcrum. Levers can change the amount of force applied or the distance over which the force is applied. **Wheel and Axle:** A wheel and axle consists of a large wheel connected to a smaller axle. When force is applied to the wheel, it can change the direction of the force and multiply it. **Pulley:** A pulley is a wheel with a groove that a rope or cable can run through. Pulleys are used to lift or move objects and can also change the direction of force. **Inclined Plane:** An inclined plane is a flat surface that is angled. It allows objects to be moved up or down with less force over a longer distance. **Wedge:** A wedge is a triangular-shaped object used to split, lift, or secure materials. It transforms a force into two forces acting in different directions. **Screw:** A screw is an inclined plane wrapped around a cylindrical post (called a screw thread). When the screw is turned, it converts rotational motion into linear motion, making it useful for lifting or holding objects. These simple machines form the basis of more complex machinery and tools we use every day. They enable us to perform a wide range of tasks with less effort by altering the magnitude or direction of forces.


What is a complex machine?

A complex machine, also known as a compound machine, is a machine that is a combination of several simple machines.A simple machine is defined as a machine that makes work easier by modifying or transmitting force or motion.A simple machine would be a wheel and axle or a wedge and jackscrew.A complex machine would be a car or a drill.Machine - is a device that helps us do work (work is a force that acts on an object to make the object move. To get work, you multiply force by distance)A simple machine - is a tool or device made up of one basic machine (there are 6 simple machines screw, ramp/inclined plane, wedge, pulley, wheel and axele, and levers.)ex. of simple machines are: (screw - screw, hose nozzle, etc.) (inclined plane - slide, ramp etc. ) (wedge -chisel, knife, etc.) (pulley - crane, flagpole, etc.) (wheel and axle - door knob, steering wheel, bicycle wheel, etc.) (Lever - 1st class lever: see -saw, 2nd class leer: wheelbarrow, 3rd class Lever: hockey stick, broom, etc.)a Complex Machine - is a system in which simple machines all work together, parts of a complex machine that have just one function are called subsystems and often contain a simple machine.ex. of complex machines can be as simple as scissors, or as complicated as a lab topA complex machine is really 2 or more simple machines in one machineex. Car or a bicycleComplex Machine - is a system in which simple machines all work together, parts of a complex machine that have just one function are called subsystems and often contain a simple machine. ex. of complex machines can be as simple as scissors, or as complicated as a lab topA complex machine is really 2 or more simple machines in one machineex. Car or a bicycleall the six machines can put together to makebig machine.


What does the simple machines help us?

Simple machines are the most basic ways of making work easier or more efficient. There are 6 of them (if the different kinds of levers are considered the same simple machine): Inclined plane: Spreads out the work needed to move the object, so less is needed at once. Lever (first class): Changes direction of force applied. Load is on the opposite side of the fulcrum than the side that the force is applied on. Lever (second class): The load and force are on the same side of the fulcrum, with the force being applied further from the fulcrum. The work is easier, but the load isn't lifted as high. Lever (third class): Similar to second class levers, the load and force are on the same side as the fulcrum, but the force is closer to the fulcrum. The work is therefore harder, but the load is lifted more efficiently Wheel and axle: Just what it sounds like. The wheel is a simple, but brilliant tool that makes it so the inside and the outside make the same amount of rotations in the same amount of time, but move at different speeds. Turning the axle makes the outside of the wheel move fast, while turning the outside of the wheel makes turning the axle easy. Pulley: Made up of a wheel and a rope, the rope fitting on the groove of the wheel. This machine can either change the direction of the force, increase the efficiency of lifting a load, or make lifting the load easier. The more times the rope goes around a set of two wheels, the more efficient the pulley gets Screw: Changes the direction of force from around in a circle to down. The tool the "Screw" was named after this simple machine. Wedge: Also changes the direction of force from in one direction to out. This is used by scissors, axes, knives, or anything else that can cut.


What simple machine are in a bolt?

A bolt is one of the easiest examples of a easy screw machine. It is a mechanical device that is used to preserve the two objects collectively with the assist of a washer and a nut. The bolt has thread cuttings all over its size that flawlessly suit the threads on the inner of a nut.

Related Questions

Is a screw driver a kind of wheel and axle?

No, a screwdriver is not a kind of wheel and axle. A wheel and axle is a simple machine that consists of a circular wheel fixed to a central rod (the axle), allowing for rotational movement to reduce friction. In contrast, a screwdriver is a tool designed to turn screws, typically featuring a handle and a shaft with a tip that fits into a screw's head, functioning primarily through torque rather than rotational movement of a wheel and axle.


Is a screwdriver a wheel and an axle?

No, a screwdriver is not a wheel and an axle. A screwdriver is a simple hand tool designed for turning screws and consists of a handle and a shaft with a tip that fits into the screw head. In contrast, a wheel and axle is a type of simple machine that consists of a circular wheel attached to a central rod (the axle), allowing for the movement of objects with less friction. These two tools serve different purposes and operate on different mechanical principles.


How do you replace a Bosch rotak wheel?

To replace a Bosch Rotak wheel, first, ensure the lawn mower is turned off and unplugged for safety. Locate the wheel you want to replace and remove the retaining nut or screw using the appropriate tool, such as a socket wrench or screwdriver. Carefully pull the old wheel off the axle, then align the new wheel with the axle and secure it in place with the retaining nut or screw. Finally, double-check that the wheel is securely attached before using the mower again.


Is a screwdriver an example of wheel and axle?

A screwdriver is nothing but an example of a tool


Is a shovel a wheel and axel?

No, a shovel is not a wheel and axle. A wheel and axle is a simple machine consisting of a circular wheel attached to a rod (the axle), which allows for the easy movement or lifting of objects. A shovel, on the other hand, is a tool designed for digging, lifting, and moving materials, primarily consisting of a blade and a handle, which does not fit the definition of a wheel and axle.


Is a screwdriver a kind of wheel and axle?

No, a screwdriver is not a kind of wheel and axle. A screwdriver is a hand tool designed for turning screws, while a wheel and axle is a simple machine consisting of a circular wheel attached to a rod (the axle) that allows for movement or the application of force. They serve different purposes and operate on different mechanical principles.


Would a funnel be a wheel and axle or screw?

A funnel would be considered a simple machine known as a wheel and axle. The wheel and axle consist of a wheel (the circular opening of the funnel) attached to an axle (the stem or handle of the funnel) that rotates around a central axis. This design allows for the efficient transfer of materials, such as liquid or small particles, from a higher to a lower level through the funnel's narrow opening.


How can I take out a stripped screw effectively?

To remove a stripped screw effectively, you can try using a rubber band, a screw extractor tool, or a rotary tool with a cutting wheel. Place the rubber band over the screw head to provide extra grip, use the screw extractor tool to grip and turn the screw, or carefully cut a new slot with the rotary tool to turn the screw out.


What is the best truing stand thru axle adapter for ensuring accurate wheel alignment and maintenance?

The best truing stand thru axle adapter for accurate wheel alignment and maintenance is the Park Tool Thru Axle Adaptor.


Is screwdriver is a kind of wheel axle?

No, a screwdriver is not a kind of wheel axle. A screwdriver is a hand tool used for turning screws, while a wheel axle is a mechanical component that allows wheels to rotate and supports the weight of a vehicle. They serve different functions and are used in different contexts.


What kind of tool is a wheel and axle?

it is when the computer doesnt have enough memory. im kidding i dont know ;)


How can I remove the rear hub from a bicycle wheel?

To remove the rear hub from a bicycle wheel, you will need to first remove the cassette or freewheel from the hub using a cassette removal tool. Then, loosen the locknuts on the axle using a wrench and remove the axle from the hub. Finally, use a hub removal tool to unscrew the hub from the wheel.