0
What else can I help you with?
How long, on average, does it take to install an inground swimming pool?
It takes an estimated eight to twelve weeks. It depends on the season. It can take longer during rainy seasons or in the winter.
Swimming Pool Contractor?
form_title=Hire a Swimming Pool Contractor form_header=Install a swimming pool in your back yard for hours of fun and enjoyment. What size of pool are you looking to get?=_ Will this be an inground or above ground pool?= () Inground () Above
What's a good reference book or website for construction of an inground concrete block swimming pool?
Don't do it. Too many possibilities for leaks. Get Fiberglass or vinyl pool, learn to install that instead.
Cost to install an inground pool?
it cost from $15K to $100k depending on what you want and where you are.
How to install a INGROUND pool light?
Do you have a pool light niche already installed in the pool? If not, you need a pool builder to do the job to code.
How do you find and repair an electrical short in an inground pool light fixture and wall switch?
You need the proper tools and the qualifications to do this job. Call a qualified swimming pool electrician or pool tech to do the job to code and install a GFCI. k
What are fun things to do in your backyard?
Football, swimming (install a small plastic swimming pool), etc.
What is a cheap way to repair a 12 in x 12 in section of an inground pool liner?
Remove the old damaged liner and install a new one.
Do they make a tool to remove stuck inground swimming pool ladders?
Option # 1...Use a 4x4 piece of lumber and a hydraulic jack, one rail at a time. Option # 2...Cut the ladder with a sawzall and install plastic slide deck mountswith tapcons. Then slide the ladder into the deck mounts and tighten side bolts.
How do you install a niche in an inground pool with a vinyl liner?
Have you considered measuring exactly where it is to go then manufacture it from fibre glass outside the pool install the plumbing into it and drop it into place. that way you can easily remove when you wish and make repairs when needed.
What is the best way to provide a water barrier for the sides of an above ground pool when sinking it two feet?
Water barrier for a steel or alum wall above ground pool you want to bury inground? Your best bet if you insist to bury the pool is going to be make sure the soil up against the pool for 2' is a good coarse sand with proper drainage, that will give you the best chance for a wall lasting a while. Hard to say how long the wall will last as the pool you describe was never intended for inground installation. ******PLEASE BE SURE to install a fence around the swimming pool according to your local code for swimming pools. As your pool is now a hazard for Children and without a fence would offer no protection from accidents. ********* good luck getapool.com good swimming take care
How do you set an outdoor swimming pool on a rocky land?
Remove as much rock as possible by hand or machine to grade and level the pool area. Depending on the size and style of pool, install a layer of sand, approx. 4" thick, that should be leveled, raked, and compacted, to avoid dimples, depressions, or settling of the liner. For inground pools the area will have to be blasted to remove the rock.
