0
What else can I help you with?
What are the settings for EZ republic spreader for scotts southern lawn?
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
What is the scotts standard broadcast spreader setting for vigoro fertilizer?
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
What is a broadcast spreader used for?
A broadcast spreader is used to spread seed, fertilizer or sand over a large area. It is commonly used on farms and is an alternative to using a drop spreader.
What should the setting be for 13-13-13 fertilizer on a Scott 3000 speedy green broadcast?
For using a Scott 3000 Speedy Green broadcast spreader with 13-13-13 fertilizer, the recommended setting is typically around 4 to 5 on the spreader. However, it's important to check the specific product label for precise instructions, as settings can vary based on the type of granules and the desired application rate. Always calibrate your spreader to ensure even distribution and avoid over-fertilization.
What setting is needed to spread 10 lbs of fertilizer per 1000 sq ft with a speedy green broadcast spreader?
To spread 10 lbs of fertilizer per 1000 sq ft with a Speedy Green broadcast spreader, you need to adjust the spreader setting according to the manufacturer's recommendations for the specific fertilizer you are using. Typically, this involves setting the dial to a range between 5 to 8, but it can vary based on the type of fertilizer and its granule size. Always perform a calibration test by measuring the output over a smaller area to ensure you achieve the desired application rate. Additionally, check the spreader's manual for precise settings tailored to different fertilizers.
What is the setting on an ez broadcast spreader made by republic when applying ace green turf crabgrass preventer 36-3-4?
I spread 10,000 sq-ft of ACE Green Turf over about 12,000 sq-ft of lawn using my Republic rotary broadcast spreader. I used a setting of 4 for the front yard (which was too much) and 2.5 in the back yard (which was too little). So, I'm thinking the right setting was about 3. Not very scientific, hope this helps...
Scotts turf builder plus with weed controlwhat is the setting when using the speedy green 2000?
You would want to use spreader setting 3.25
What is the setting on a vigoro 4000 spreader when using CIL Fertilizer?
The recommended setting for a Vigoro 4000 spreader when using CIL Fertilizer is typically around 10 to 12. However, it's best to refer to the specific product label for accurate settings, as different formulations may require adjustments. Always calibrate your spreader for the specific fertilizer and ensure even distribution for optimal results.
What is the best fertilizer distributing tool?
I would go with a broadcast spreader and use dry fertilizer , might be safer than using liquid fertilizer with a sprayer.
What is vigoro spreader setting when using scotts turf builder 32-0-4?
For applying Scotts Turf Builder 32-0-4 using a Vigoro spreader, the recommended setting is typically between 3 to 4, depending on your specific model and the application rate desired. It's essential to check the spreader calibration chart that comes with your Vigoro spreader for precise settings. Always conduct a test run on a small area to ensure proper distribution and adjust if necessary.
What is the k-gro spreader setting for vigoro fertilizer?
The k-gro spreader setting for Vigoro fertilizer can vary based on the specific type of Vigoro product you are using and the area you wish to cover. Generally, the recommended setting is often found on the fertilizer bag or in the product label instructions. For best results, always refer to the manufacturer's guidelines for the specific Vigoro fertilizer you have. Additionally, adjusting the setting based on your spreader's calibration may be necessary for optimal distribution.
What is the setting on pursell's sta green 4500 spreader with turf builder plus 2?
For a Pursell's Sta-Green 4500 spreader using Turf Builder Plus 2, the recommended setting is typically around 4 to 5. However, it's essential to consult the specific product label for precise instructions, as settings can vary based on the type of spreader and the application method. Always ensure to calibrate your spreader before use for optimal results.
