0
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
What else can I help you with?
Can you tell me what settings are for Ortho spreader and ez broadcast spreader by republic for fertilizer?
The correct setting for both spreaders is 3
What setting for scotts easy green for vigoro fertilizer 29-0-04?
For a drop spreader 7, broadcast 5
Setting for scott's rotary spreader of 13-13-13 fertilizer?
Setting for scotts rotary spreader of 13-13-13 fertilizer?
What is the spreader setting for grub ex when using a sears broadcast spreader?
The recommended setting would be 3
What are the settings for a EZ broadcast spreader by republic?
The correct setting for an EZ broadcast spreader by republic is 3. Many persons have used this code and it has worked perfectly for them. Depending on what you are doing you can also use the number 4 setting.
What setting is needed to spread 10 lbs of fertilizer per 1000 sq ft with a speedy green broadcast spreader?
To spread 10 lbs of fertilizer per 1000 sq ft with a Speedy Green broadcast spreader, you need to adjust the spreader setting according to the manufacturer's recommendations for the specific fertilizer you are using. Typically, this involves setting the dial to a range between 5 to 8, but it can vary based on the type of fertilizer and its granule size. Always perform a calibration test by measuring the output over a smaller area to ensure you achieve the desired application rate. Additionally, check the spreader's manual for precise settings tailored to different fertilizers.
What should the setting be for 13-13-13 fertilizer on a Scott 3000 speedy green broadcast?
For using a Scott 3000 Speedy Green broadcast spreader with 13-13-13 fertilizer, the recommended setting is typically around 4 to 5 on the spreader. However, it's important to check the specific product label for precise instructions, as settings can vary based on the type of granules and the desired application rate. Always calibrate your spreader to ensure even distribution and avoid over-fertilization.
What is the conversion between Republic EZ broadcast spreader and scotts broadcast spreader?
The Republic EZ broadcast spreader and the Scotts broadcast spreader do not have a direct conversion, as they are designed for different types of applications and may have varying settings for seed and fertilizer types. However, many users find that a general rule of thumb is to adjust the settings based on the specific product being used, often starting with a mid-range setting and adjusting as needed. It's important to consult the product manual or guidelines for each specific spreader to ensure accurate application rates.
What are the settings for EZ republic spreader for scotts southern lawn?
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
What is the k-gro spreader setting for vigoro fertilizer?
The k-gro spreader setting for Vigoro fertilizer can vary based on the specific type of Vigoro product you are using and the area you wish to cover. Generally, the recommended setting is often found on the fertilizer bag or in the product label instructions. For best results, always refer to the manufacturer's guidelines for the specific Vigoro fertilizer you have. Additionally, adjusting the setting based on your spreader's calibration may be necessary for optimal distribution.
What setting should you use for lawn seed on a broadcast spreader?
The setting for lawn seed on a broadcast spreader typically ranges between 3 to 5, but it can vary depending on the specific type of seed and the spreader model. Always refer to the seed package for recommended spreader settings and adjust based on your lawn's needs and your spreader's calibration. It's also advisable to test the spreader on a small area first to ensure even distribution.
What is the setting on a vigoro 4000 spreader when using CIL Fertilizer?
The recommended setting for a Vigoro 4000 spreader when using CIL Fertilizer is typically around 10 to 12. However, it's best to refer to the specific product label for accurate settings, as different formulations may require adjustments. Always calibrate your spreader for the specific fertilizer and ensure even distribution for optimal results.
