0
The ideal setting for a Speedy Green spreader when applying pulverized lime typically ranges between 5 to 8, depending on the specific model and the application rate recommended for your lawn or garden. It's essential to check the product label for the appropriate application rate in pounds per 1,000 square feet, and adjust the spreader setting accordingly. Always conduct a test run on a small area to ensure even distribution before covering the entire area.
What else can I help you with?
What is the setting on a Scott's speedy green 2000 spreader for lawn seed?
set on 3.25
What is the K setting on a Scotts R8A spreader converted to on a Scotts Speedy Green spreader?
The K setting on a Scotts R8A spreader corresponds to a specific rate of application for granular materials. For a Scotts Speedy Green spreader, the equivalent setting can vary, but generally, you can use a conversion chart to find the closest match. Typically, the K setting on the R8A might translate to a setting around 4-5 on the Speedy Green, but it's always best to refer to the manufacturer's conversion guide for precise adjustments based on the material being spread.
Scotts turf builder plus with weed controlwhat is the setting when using the speedy green 2000?
You would want to use spreader setting 3.25
What is the setting on a Scott's speedy green 2000 spreader for grubex?
For a Scott's Speedy Green 2000 spreader, the recommended setting for applying GrubEx is typically around 5 to 6. However, it's essential to check the specific product label for GrubEx, as application rates can vary based on the concentration and formulation. Always calibrate your spreader and adjust as needed to ensure even coverage.
What is the setting on a speedy green 2000 for ammonium Nitrate?
The recommended setting for ammonium nitrate on a Speedy Green 2000 spreader is typically around 19 to 21. It is always a good idea to refer to the manufacturer's guidelines or consult with a professional to ensure proper application.
Are the settings on the speedy green spreader per 1000 feet?
Yes, the settings on a Speedy Green spreader are typically calibrated to apply materials over a distance of 1,000 square feet. The specific setting for your spreader will depend on the type of material you're using (like grass seed, fertilizer, or lime) and the desired application rate. Always refer to the product label and the spreader's manual for the correct settings to ensure proper distribution.
Scotts Speedy Green 2000 spreader settings for 4lb per 1000 sq ft of Eagle 0.39 Granular Turf Fungicide?
setting @6
What is the setting on Scott's speedy green 2000 spreader for fertilizer at 5 lbs per 1000 sq ft?
To set Scott's speedy green 2000 spreader for applying fertilizer at a rate of 5 lbs per 1,000 sq ft, refer to the spreader's calibration chart, which typically indicates the appropriate setting for different fertilizers. Generally, for a rate of 5 lbs per 1,000 sq ft, you might use a setting around 4 or 5 on the spreader, but it's essential to check the specific product instructions or the manual for exact recommendations. Always calibrate the spreader beforehand to ensure accurate application.
What is the setting on speedy green 2000 for Bayer grub killer plus?
For the Speedy Green 2000 spreader, the recommended setting for applying Bayer Grub Killer Plus is typically around 5 to 7. However, it's essential to consult the product label for the most accurate setting, as it may vary based on specific application needs and local conditions. Always calibrate the spreader before use to ensure even distribution.
What is the setting on a Scott's speedy green 2000 spreader for ortho bug b gone?
For the Scott's Speedy Green 2000 spreader, the recommended setting for applying Ortho Bug B Gone is typically around 3 to 4. However, it's always best to check the product label for specific instructions, as application rates may vary based on the formulation. Additionally, calibrating your spreader based on your lawn size and the product's coverage guidelines can ensure effective application.
What is the setting on a Scott's speedy green 2000 spreader for tall fescue grass seed?
Overseeding -- 7 1/2 New Lawn/ Bare spot -- 18 but it would be best to go over the lawn twice at setting 7 1/2 in perpendicular directions.
What should the setting be for 13-13-13 fertilizer on a Scott 3000 speedy green broadcast?
For using a Scott 3000 Speedy Green broadcast spreader with 13-13-13 fertilizer, the recommended setting is typically around 4 to 5 on the spreader. However, it's important to check the specific product label for precise instructions, as settings can vary based on the type of granules and the desired application rate. Always calibrate your spreader to ensure even distribution and avoid over-fertilization.
