0
What else can I help you with?
Grass Seed Spreader?
form_title= Grass Seed Spreader form_header= Keep your grass growing all year long with a seed spreader! What is the size of your lawn?*= _ [50] Do you need to avoid planting grass anywhere?*= () Yes () No What sort of grass do you want planted?*= _ [50]
What setting should you use for lawn seed on a broadcast spreader?
The setting for lawn seed on a broadcast spreader typically ranges between 3 to 5, but it can vary depending on the specific type of seed and the spreader model. Always refer to the seed package for recommended spreader settings and adjust based on your lawn's needs and your spreader's calibration. It's also advisable to test the spreader on a small area first to ensure even distribution.
What is the conversion between Republic EZ broadcast spreader and scotts broadcast spreader?
The Republic EZ broadcast spreader and the Scotts broadcast spreader do not have a direct conversion, as they are designed for different types of applications and may have varying settings for seed and fertilizer types. However, many users find that a general rule of thumb is to adjust the settings based on the specific product being used, often starting with a mid-range setting and adjusting as needed. It's important to consult the product manual or guidelines for each specific spreader to ensure accurate application rates.
Can you apply scotts turf builder with halts and then sow Bermuda grass?
Because Scotts Turf Builder with Halts prevents the germination of grassy weeds, such as crabgrass, for up to 4 months, it will also prevent the germination of grass seed, including Bermuda grass. It is best to use Scotts Starter Food when seeding new grass seed or sod.
What is the setting on a Scott's 3000 spreader for lawn seed?
For a Scott's 3000 spreader, the recommended setting for lawn seed typically ranges from 3 to 5, depending on the specific type of seed and the desired application rate. It's always best to consult the seed packaging for precise recommendations and to perform a test run on a small area first to ensure even distribution. Adjust the setting as needed based on your results and the spreader's calibration.
What is the setting on a Scott's speedy green 2000 spreader for lawn seed?
set on 3.25
How do you calibrate scotts speedy green 2000 spreader?
A) Adjust the micrometer setting to 2.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjustalignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009(MORE)
How do you calibrate a Scotts Speedy Green 1000 spreader?
To adjust calibration, do the following:A) Adjust the micrometer setting to 11.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjust alignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009
What is the best grass seed brand?
Rebel grass seed is supposed to be phenomenal. It works really well and the grass it produces is supper natural looking green. Alternatively, Patch Perfect looks like a good brand, it's always advertised on T.V.
What is the setting on a Scott's speedy green 2000 spreader for tall fescue grass seed?
Overseeding -- 7 1/2 New Lawn/ Bare spot -- 18 but it would be best to go over the lawn twice at setting 7 1/2 in perpendicular directions.
What is setting for lime pellets with the Scotts Standard Broadcast Spreader?
When setting the Scotts Standard Broadcast Spreader for lime pellets, it is important to refer to the manufacturer's recommendations for the specific product being used. Generally, lime pellets are larger and heavier compared to grass seed or fertilizer, so a higher setting on the spreader may be required to ensure proper coverage. It is recommended to start with a conservative setting and make test passes in a small area to determine the appropriate setting for even distribution of the lime pellets.
What are the setting for ortho drop spreader?
The settings for an ortho drop spreader typically depend on the type of material being applied, such as fertilizer, seed, or herbicide. Generally, you can adjust the flow rate by turning the dial or lever on the spreader to the recommended setting indicated on the product label. It's important to calibrate the spreader according to the manufacturer's guidelines for even distribution and to avoid over-application. Always check the specific instructions for the material you're using for the best results.
