The fence can be grounded at any convenient place you chose. If the fence is greater that 10 feet then it should be grounded at every 10 foot interval along its continuous length.
To install metal fence posts, first dig holes in the ground at regular intervals. Place the posts in the holes and fill them with concrete to secure them in place. Make sure the posts are level and allow the concrete to dry before attaching the fence panels.
clôture métallique this is how you say metal fence in french
You can find metal fence posts at home depot or your local hardware store. They carry the posts you will need to support the metal fence or made of metal itself.
The fence must be made of a conducting material, such as steel. The fence must be isolated from the ground, using insulators. It must not touch the ground or the posts suspending it, except through insulators made of non-conducting material, such as pottery, glass or plastic. A high voltage, low current, generator can then be connected to it. One pole into the ground, using a metal rod pushed into the ground, and the other onto the fence. Most generators are driven by a battery, through an oscillator and then a transformer, which increases the voltage. It is better to use a generator properly manufactured, for the purpose of providing a small shock, without risk of death or fire.
C on a metal ladder against the fence would be the least unpleasant because the ladder would act as a barrier, preventing direct contact with the electrified fence. Standing on wet grass during rain (A) or on rubber mat/very dry ground (B) would allow for better conductivity and a stronger shock.
about $300-$1000
A fence post should typically be placed about one-third of its length into the ground for stability and support.
a metal fence (railings)
Yes, the metal can be recycled.
You put a fence round an area of ground.
A fence post should be set at least 1/3 of its length in the ground for optimal stability and durability.