Press Menu on the remote, select Setting, select Lamp Counter
The Xtrax Multiverse is no longer a current series of Sanyo projectors. They have been replaced by newer models. The used price will depend on the age, condition and the number of hours left on the lamp.
The range of expected life range for projector lamps is 750 to 6000 hours with an average of 2000 hours.
Whenever most projectors flash the lamp status light, but nothing happens, it is usually a circuit board issue.I personally have had the same issue before. The lamp was brand new, but it turned out being the projector and not the lamp.If, however, it may not be a circuit board issue, it could be your lamp. If you have used your lamp over 1000 hours, it's probably it.Contact ViewSonic Customer Service to schedule a repair, or to get price quotes.
LED projectors are very different than your typical DLP and LCD projectors as they do not require a typical projector lamp like their predecessors. Led projectors require less maintenance than their counterparts and have much longer "lamp life" which is typically around 20,000 hours for an LED light source versus 2,000-4,000 for a conventional projector lamp. LED projectors use the light harnessed by individual laser diodes to create the light that is usually created through a standard type of bulb or lamp.
Simply buy a RCA universal remote at your nearest dollar store and press the button that reads antenna. I had this same problem for weeks and i bought the remote today and tried everything for hours. Then my brother simply walks in grabs the remote presses the button and leaves. IT WORKS NOW.
After power on / warm up is complete. Hold the power button in for 20 seconds. Lamp hours will appear in upper right hand corner.Rejean Deragon, CTS
The Xtrax Multiverse is no longer a current series of Sanyo projectors. They have been replaced by newer models. The used price will depend on the age, condition and the number of hours left on the lamp.
You can rent a LCD projector at lcdprojectorrentals.com. This online company will deliver the projector 24 hours before your event and promises easy return shipping.
The range of expected life range for projector lamps is 750 to 6000 hours with an average of 2000 hours.
Typically, a lamp in an LCD video projector will last in the region of 2000 - 3000 hours. The specification varies for almost every different model of projector and the actual life span depends on numerous factors. Normally, lamps do not fail instantly but the light output will reduce over a period of time. A 2000 hour lamp may need replacing in as little as 1000 - 1500 hours or it may last in excess of 3000 hours. Generally, repeated starting of a lamp will put more stress on the lamp than continued operation. A projector that is used repeatedly for a few minutes at a time will get through lamps in fewer hours than one that is left on for several hours at a time.
The duration of Something Remote is 1.53 hours.
The duration of Remote - film - is 1.33 hours.
it takes a wii remote about 3or4 hours to recharge
A ---- check is daily base B ----- check is 300 hours C ----- check is 1500 hours D ----- check is 6000 hours.
For one remote it will take between an 1.5 to 2 hours to fully charge your wiimote. However, if you are charging two wiimotes it will take twice as long (3 hours to 4 hours) as the energy is being shared between two controllers.
it usually takes 2 hours
The power rating is printed on the lamp holder, expressed in watts. As power describes the rate of energy consumption, you need to convert the number of watts into kilowatts (divide by 1000) and multiply this figure by the time for which the lamp is in use (expressed in hours) -this will tell you the number of kilowatt hours of energy used.