= Answer = Yes. Component cables can carry an HD signal.
DVI and HDMI are the preferred ways to transfer an HD signal though because the signal is carried digitally across the cables as opposed to analoglly as with the component cables.
= Answer = There are high definition analogue component interfaces around for HD televisions but they are not common. I believe that almost all new televisions will have only digital interfaces (HDMI or DVI for example). I have used some older plasma screens that only had analogue inputs, so analogue component was the only interface available. The simple answer is, if the monitor and the signal source both have analogue component interfaces, then you can use component cables. It's worth remembering that all HD sources are digital, whether on DVD or off air. There is no benefit in converting to analogue as it will need to be converted back to a digital signal for processing inside an LCD or plasma screen.
High Definition Component Video Input (Phillips Corp)
Component (red-green-blue) 3 wire RCA will always have a superior picture.
HDMI and DVI are both interfaces that have specific cables and both support HD video. Component and composite both refer to methods of encoding information to represent a moving image and they are not types of cable. Equipment will often have connectors for composite or component inputs and outputs but the type of connector and cable used can vary from one item to another. However, to answer the test question that has been used as this question, HDMI and DVI support digital video data including HD video. Component specifies a signal format that can be digital or analog and also supports HD video. Composite is a format for a single encoded signal that supports standard definition only.
RCA connectors can be used for both composite (1 connector) video and component (3 connector) video. The quality order is: BASIC - Composite (1 RCA wire, Yellow) BETTER - S-Video (1 wire, usually black) BEST - Component (3 RCA wires, Red, Green Blue) Composite can only send standard definition video, up to 480i. S-Video can only send standard definition video, up to 480i. Component can send video up to 1080i High Definition.
You need an HD-capable display to see HD. You may not need an HDMI cable to watch in HD quality, if your source has the ability to display 1080i video through component video cables. All new Blu-Ray players coming out now have been changed so that HDMI is the only way to get high-definition (1080i or 1080p) video.
Monster Gamelink component video cables enable HDTV will be a good choice.
Blue cables designate one of the three wires for a component video cable connection. Along with the Red and Green wires, these three form a component video cable.
The PS3 will work on any TV that can connect by PS3 A/V cables or any of the optional PS3 Audio Video connection cables (component, S video, HDMI)
ViewSonic Component video cables have received very good reviews from tech sites and blogs and are highly recommended.
There are several types of video cables. These types include: coaxial cables, HDMI cables, component video,S-Video, and standard video cables. There are used to connect the various pieces of equipments that we use today.
HDMI
With component cables only the red and white are for sound and the other 3 are for video.
They can be called A/V cables and ones for HDTV are called component video cables. They all have RCA type plugs and the yellow is video and the red and white are audio on A/V cables. Component Video cable have two additional cables for HD Video signal besides the yellow one.
It won't be very HD, best to connect with a HDMI cable or if that is not possible use component cables.
S Video to component cables can be purchased at many retailers as they are very common. Some of these retailers include Walmart, Staples, or Office Max.
It allows you to connect component cables into a HDMI connector/cable on the tv set.
High Definition Cables will produce higher quality video and sound when used.