Yes. 7.2 is actually a misnomer, as there isn't 2 sub channels, just two outputs for dual subs. It should actually be called 7.1. There are very few 7.1 mixes around. Just about everything is 5.1 in Home Theater. You can configure any 7.2 surround receiver to combine the left and right surround channels with the left and right rear channels to allow you to use a 5.1 speaker system.
Not if you have full range speakers like tower speakers. Even with large speakers, the surround sound mix is encoded with LFE (low frequency effect) sounds that would not be heard without a subwoofer.
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
If the speakers are passive and you can connect a line input into the sub separately, then yes. Most receivers can be configured for only two front speakers and a sub, although you will be losing all of the surround effect and the center channel benefits.
Unlike the old Dolby Pro Logic Surround, Dolby Digital 5.1 and 7.1 have full frequency response abilities for all surround channels. In reality, most sound engineers limit the frequencies sent to the rear and surround speakers since the typical home setup has smaller speakers in these positions. Of course, the LFE channel is limited to 100 to 150Hz for true sub bass operation, but can be pressed into service to provide low frequencies to compensate for small left and right front speakers.
Dolby 5.1 is a multi-channel audio format. Basically meaning, it's surround sound. There is a Left, Centre, Right, Left Surround, Right Surround and LFE (Sub) Speaker. Dolby 2.0 is simply 2 speakers, Left and Right. Similar to the Stereo sound you get from your TV. The Dolby bit means it has been compressed and encoded using Dolby technolgies, normally AC3.
If the receiver is just stereo, not surround sound, you will not be able to create a surround sound (front, centre, sub, surround) setup.
Not if you have full range speakers like tower speakers. Even with large speakers, the surround sound mix is encoded with LFE (low frequency effect) sounds that would not be heard without a subwoofer.
a 6.1 or 7.1 surround receiver would be required to amplify the sound for this number of speakers.
Its the most common type of sound system used in homes. It consists of a Sub-Woofer for bass effect and 2 speakers to produce a surround sound.
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
a car subwoofer is better because it dilivers clear and louder sound then the computer sound speakers but the sound speaker are better for the voice it depends what you are using them for.
If you use a surround sound receiver that let you define the numbers of channels, set it for 2.0 or 2.1 if you have a sub. The center channel audio will be mixed into the left and right speakers.
The Logitech X 540 is not a mouse. The product of this name is a set of Logitech surround sound speakers and a sub woofer. The price in the United States is $229.99.
Personally, I would prefer the Bose Acoustimass 5 because it has a nice sub-woofer in addition to two very productive surround sound speakers that may face two directions at once.
If the speakers are passive and you can connect a line input into the sub separately, then yes. Most receivers can be configured for only two front speakers and a sub, although you will be losing all of the surround effect and the center channel benefits.
Unlike the old Dolby Pro Logic Surround, Dolby Digital 5.1 and 7.1 have full frequency response abilities for all surround channels. In reality, most sound engineers limit the frequencies sent to the rear and surround speakers since the typical home setup has smaller speakers in these positions. Of course, the LFE channel is limited to 100 to 150Hz for true sub bass operation, but can be pressed into service to provide low frequencies to compensate for small left and right front speakers.
Both of these numbers refer to the speaker set up of the home theater. 2.1 represents two front channel speakers (left and right) and one LFE (low frequency effects) channel, otherwise known as the subwoofer. 5.1 surround sound is just that: you are surrounded by speakers. You have your left channel, right channel and subwoofer (as in 2.1) but you also have a center speaker and two surround speakers (generally in plane with your seating position or slightly behind it). For real 'home theater' applications, 5.1 surround sound is going to provide you with the better movie watching experience. All modern movies and in fact most DVDs (and Blu-Ray etc) have 5.1 surround tracks on them. By playing these movies on a 2.1 home theater, all of the sound that would go to the center speaker or the surround speakers is played only by the front two speakers. A 5.1 surround system versus a 2.1 system will draw you into the movie and give you a better experience. All standard definition television content is broadcast in stereo and for this, there is no benefit of 5.1. For home theater applications, however, 5.1 is the way to go.