Audio out or headset out from the laptop to audio IN on the surround unit. The audio level on the laptop might need to be set at MAX to get enough volume for the surround to use properly.
To hear a full surround sound signal you will need to have content that is stored in a surround sound format and a sound card that supports multi-channel audio outputs.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
Connect the sound system to the AUDIO OUTPUT connectors on the back of your TV. If theses connectors are not there you will need to get a new TV with these connectors or if there is a cable or Satt. box, connect the surround to these.
No, you will need a surround sound receiver or amplifier with 5 speakers and a subwoofer to hear surround sound.
Connect your PS3 to your TV then connect you surround sound to your TV.
A DVD player does not have surround sound built into it. You can purchase surround sound speakers and connect them to the DVD player. This will make your movie experience much better.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
As a matter of fact, Home Depot does sell a laptop surround sound system. The price may vary depending on the brand in which you choose. Choose wisely and aim for the best of the best.
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
if your laptop have spdif output then u can stream digital signal from ur laptop to z5500 decoder, it can play it in surround sound with dolby prologic if your laptop have spdif output then u can stream digital signal from ur laptop to z5500 decoder, it can play it in surround sound with dolby prologic
To hook up surround sound to your home entertainment system, you will need a receiver that supports surround sound, speakers, and speaker wires. Connect the speakers to the receiver using the appropriate wires, and then connect the receiver to your TV or media player using HDMI or optical cables. Adjust the settings on your receiver to enable surround sound, and enjoy immersive audio experience.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
Yes but you will need HDMI cables.
To set up surround sound in your home entertainment system, you will need a receiver that supports surround sound, multiple speakers (front, center, rear), and a subwoofer. Connect the speakers to the receiver using speaker wire, position them around the room for optimal sound, and adjust the settings on the receiver to calibrate the sound for a surround sound experience.
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
There are essentially two ways to get surround sound out of the Xbox. Via HDMI or via optical (TOSLINK) out. If you have the component video cable, then the end that attaches to the Xbox has an optical out port. Simply attach this to the optical in on your home theatre receiver with an optical cable. If you want to use audio via HDMI, in order to get surround sound you'll have to have an HDMI receiver capable of receiving audio. In this case run the Xbox via HDMI to the receiver and then the receiver via HDMI to the TV. The HDMI will send both audio and video. If you have the official Xbox HDMI cable you can also connect the HDMI cable directly to the TV and use the optical out connector that it comes with instead.