0
In modern Stage Lighting, the lights are not directly connected to a lighting console. Instead, the console sends out a digital signal to a dimmer rack. The Dimmer rack outputs the power to the lights themselves, multi-cable drop boxes, or raceways.
Multicable drop boxes, are extension devices that use a 19 conductor socapex connector to combine 6 power lines into one cable. This multicable is then fed into an enclosure that splits the multicable back into its individual conductors. Once the conductors are seperated, they can be connected to individual outputs. These boxes are highly portable in a lighting rig and connect to a truss or batten with a standard "C" clamp.
What else can I help you with?
Stage lighting terminology?
Here are some terms: par(like golf)- light gel- color on light gobo- goes on light and projects image board- lighting console dimmer- what actually dims the lights pigtails- plugs the lights in hoist- a bar that raises and lowers the lights cue- a certain change in lights catwalk- a platform above the stage where lights are hung remote focus unit- a handheld device that performs common tasks on the console remotely Hope this helps!!
What is the area directly above the stage where the lights are (Drama Class)?
The area directly above the stage where the lights are typically referred to as the "grid" or "gridiron." This is where lighting fixtures, rigging, and other equipment are suspended to provide illumination and effects for performances. It allows for the adjustment and positioning of lights, ensuring that they can effectively illuminate the stage while remaining out of sight from the audience.
How are the modern stage and the shakespeare stage difference?
Electric lights. The stages in Shakespeare's day were actually a lot more like today's stages than those built a hundred years ago. The lighting is the main difference.
What is the name given to the lights above a stage?
A few names could apply, the most common are Deck Electrics, and overhead electrics. Any lights that above the audience or are on the audience side of the proscenium are known as Front of house lights, or FOH lights. Front of house positions include: The Cove- Also know and the catwalk, is usually 45 degrees up from the stage. the primary purpose for these lights is to light the actors on stage Balcony Rail- A lighting position mounted in front of the balcony. The main purpose for these lights are to light the scenery. Box Booms- Also known as house Sides, and Goal Posts, These are mounted at various locations on the side walls of the theater. These lights are used for a variety of things, including specials and general colored wash lighting. Apron pipe- Batten right above the apron of the stage. It is not uncommon for a theater to have anywhere from 1-4 coves, apron pipes, or box booms.
What is a stage lighting color schedule?
The color schedule lists all of the color media required to implement the lighting design for a production including the size and type of the color, and usually the location of the light that will receive the color. It is part of the paperwork in the lighting design. The color schedule can be used by electricians to prepare all of the color with reference to a single set of paperwork. ==================================== A stage lighting schedule includes a set plan for the types of equipment, lights, color gels, and gobos used throughout the entire production. It further includes, (mostly likely based on scene) when to use which particular types of lighting (spots, strobe, moving, etc) and their respective color to help display mood and really bring the production to life. Color gels or color filters can be placed over lights to display any color or aid with color correction. Gobos create dramatic effects on walls and are sometimes referred to as lighting templates. All of these stage lighting fixtures play a key role in the lighting and color schedule. The colors used in stage lighting are set out at the start of a production and a very detailed list of when to use which piece of lighting equipment coupled with a color sheet is determined. (See links below for additional details)
Stage lighting terminology?
Here are some terms: par(like golf)- light gel- color on light gobo- goes on light and projects image board- lighting console dimmer- what actually dims the lights pigtails- plugs the lights in hoist- a bar that raises and lowers the lights cue- a certain change in lights catwalk- a platform above the stage where lights are hung remote focus unit- a handheld device that performs common tasks on the console remotely Hope this helps!!
How do you get lights to track with sound on stage?
To get stage lights to flash or change in time to music, first of all you need you lighting controller to support this function. If you are using PC software to create a show, then you most likely can do this, as most computers have a microphone or line in jack, which could easily analyse audio signals. If you are using a conventional lighting console, look through the instructions to find steps to achieve this, or you can look on the back of the console for an RCA jack designed for audio input. If you have all this, the next step is to start designing chases, which is what is used to make lights track to music on stage. Follow this link to another answer that I recently wrote explaining what a chase is in stage and theatre lighting:
How do you set up stage lighting?
If you have the actual lights on the rigging: 1. Figure out what needs to be lit 2. move the lights so they light what needs to be lit (if you have a console) 1. Each light should be labeled with a number(usually a yellow sticker), on the console, check the patch list to see which channel that light goes to 2. program the channels into a submaster for easy use(varies by console, search the console name to find a manual)
What controls light through stage?
Light through a stage is typically controlled by stage lighting fixtures such as spotlights, floodlights, and moving lights. Lighting designers can adjust the intensity, direction, color, and movement of the lights to create different effects and enhance the mood of a performance. Lighting consoles and controllers are used to manage the various lighting elements and cues during a show.
What is a chase in stage lighting?
A chase (in stage and theatre lighting) is a series of 'steps' which can be played back manually, automatically, or in time to music (so long as your console can support this function). Steps can be programmed by creating a 'look' on stage, and then saving that to the console. This is repeated for as many steps as you want, and when completed, you can choose the mode in which it plays back. There are many modes depending on what console you have but they are mainly Forwards, Backwards, Bounce (first step to last step then back again) and Random. Chases can be used to create very interesting effects on stage especially when placing your lights in good positions and with certain gels. The transitions between steps don't always have to be quick, but rather a slower, more gentle fade (again, so long as your console can support this function).
I am an amateur movie maker who needs good lighting for his small green screen and am wondering if anyone has suggestions for lighting or any links to buy good lights?
If you are in need of lighting for any production, stage lighting like resnel, PAR, ellipsoidal, cyc light, strip light, scoop, LED stage lighting, moving light or spot lights will work great. Whether you are buying lights for your green screen or other productions, these lights will always do the trick. I would check out StageSpot.com (link below), they have a HUGE variety of lamps/lights for amateurs all the way to professional use.
Where are stage lights mainly used?
Stage lights have become an integral part of any stage performance, including concerts, acts, festivals and dance. Lighting is a powerful method of changing the overall mood and atmosphere of the situation, thus making it so versatile and usable.
What is the area directly above the stage where the lights are (Drama Class)?
The area directly above the stage where the lights are typically referred to as the "grid" or "gridiron." This is where lighting fixtures, rigging, and other equipment are suspended to provide illumination and effects for performances. It allows for the adjustment and positioning of lights, ensuring that they can effectively illuminate the stage while remaining out of sight from the audience.
What has the author Frederick Bentham written?
Frederick Bentham has written: 'Stage lighting' -- subject(s): Stage lighting 'The art of stage lighting' -- subject(s): Stage lighting 'New theatres in Britain.' -- subject(s): Theaters
What has the author William B Warfel written?
William B. Warfel has written: 'The new handbook of stage lighting graphics' -- subject(s): Drawings, Electric lighting, Planning, Stage lighting 'Handbook of stage lighting graphics' -- subject(s): Drawing, Stage lighting
How can you visualize stage lighting on a computer?
Funny you ask this question I've just written a post about it, you can find out here: <a href="http://www.pgstage.co.uk/news.html"> www.pgstage.co.uk/news </a> Basically the answer is a program called Vectorworks
What do use to attach stage lights to the lighting bar?
Stage lights are attached to battens(bars) using a c clamp that bolts to the bracket on the fixture and then clamps down on the bar. Make sure to also loop a safety cable around the light and bar!
