You need to clarify this a bit. If you are using the manufacturers remote to operate someone else's device then you need to contact the manufacturer of the remote. Example..If you have a Sony TV and the remote will operate any VCR too then you need to contact Sony. There are remotes that will run any device like One For All remotes. This one you can go online and get. Actually most of these can be found at the manufacturers sites if you have internet capabilities to download their manuals .
Television X do not publish legitimate free access codes.
Fault codes are where your tv has an internal problem with power that most likely prevents your tv from coming on.The faults are sometimes read by a processor and generated into blinking lights,or trouble codes
Answers.com does not provide activation codes for commercial websites.
Although Sony Trinitron televisions are now obsolete, the infra-red codes used to control Sony televisions have remained very similar for many years. It is worth trying codes for newer Sony televisions or use televisions listed as "Control S" format. Newer models may have codes that differ slightly but there is a good chance that you will have all of the basic controls.
It is connected to your computer for programming, not your TV. It sends the infrared signal to the TV to control it once it has been set up.
brought a rca remote tryin to use on a magnsonic tv
Sky TV has its own website where it provides a complete list of its programming schedule. Once can also obtain a complete TV Guide by calling the Sky company and requesting one.
Hi Dear, These are the codes fore sharp TV 011,,034,049,058,181,20,216,226
If your instructions aren't available, use the link to Thompson's instructions for the RCA remote.
Try running the universal remote programming codes until one works. There should be a sheet of codes that came with the remote. If that doesn't work than chances are that you may have other problems with the TV.
The correct spelling is "programming" (computer coding, or television presentations).
Promotional codes for UFC Fights for Pay Per View events can be obtain from the television provider. Since the payments for such events are made directly to the television provider, any promotional codes must be accepted and applied by them.
go to this website. http://66.77.167.109/rcaaccessories/RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&ACTION_CATEGORY_IDSTR_CATEGORY_4_DEVICE_REMOTES&ACTION_PRODUCT_ID=RCR412B Scroll down and go to Additional Info and click on the link. You should find all of the codes.
UniMas is a television network that offers viewers different types of sports programming, talk and reality show programming and acquired programming. There are references online to former programming, upcoming programming and current programming for UniMas.
Didn't erase programming when I tried it....
The duration of Paid Programming - TV pilot - is 660.0 seconds.
The code required for a Coby TV will vary depending on the TV itself and what remote you are programming. Some codes you can try when programming your remote are 505, 607, 625, and 633.