0
What else can I help you with?
How do you program rca remote rcr160talm1?
You should not have to program this remote.... although it says universal on it. This is an original remote and should work when you put the batteries in. For T.V viewing, just push the t.v button on the top of the remote then power/on-off .... wait for the light, then the sound, then begin with your normal activities.
What is the best code for rca universal remote rcr312w for 42 vizio tv?
I want to tell you what just worked for me... 1. Turn the component on that you want to program 2. Press and hold that component key (TV, VCR/DVD, or SAT/CBL) on your remote 3.Press ON/OFF button until your unit turns off. 4. Press Stop button to program the "code" that you remote found to work your component.
How do you program a toshiba tvdvd with a comcast 3 in 1 remote control?
YOu must program it as a Toshiba DVD using the AUX button on remote control and the codes 0695 (which worked for me) or 0503, or 1045.Then seperately set up the volume by changing the volume control lock according to directions. FYI... Comcast could not help at all!______________________________________________________That was a helpful answer, thanks.Additionally, based on my own experience a couple of minutes ago, I was able to program the Comcast remote for the Toshiba TV/DVD combo (Tosh model MD19N1, fyi) by using the AUX button & treating the TV/DVD combo as a DVD, as the answer above suggested. But the code that worked for me was the Toshiba DVD code listed in the Comcast remote pamphlet (specifically, code #20695), rather than the codes stated above. But the answer, above, to use the AUX button & treat the TV/DVD combo as a DVD is what set me on the road to being able to program the remote. Also, the answer suggested above about programming the volume for the remote, by just following the Comcast remote instructions for "unlocking" the volume was exactly right. Also, fyi, none of this programming of the Comcast remote messed up TV/DVD operation by the original remote I have for the TV/DVD. I just didn't want to have to be juggling two remotes all the time.Thanks alot for that answer above. (11/5/10)
Code for Vizio TV to program Remote control?
0178 this did not work for me. 0134 LG code worked for me.
How do you program channels on a RCA television?
This will vary by year of TV but this works often. Make sure to have the TV remote in hand. Press the menu button then choose Setup. From there choose auto program. If it ask you to select a source choose Air or cable. Then there should be an auto program option to press for the channels get programmed.
What are the att you-verse remote control codes for a proscan model plded3273a-e?
To program an AT&T U-verse remote control for a Proscan model PLDED3273A-E, you can try the following codes: 1004, 1011, or 1104. To program, press and hold the "TV" button until it lights up, then enter the code. If the light turns off, the code was accepted. If not, you may need to try the next code or use the code search feature.
How do I program a Chamberlain garage remote?
To program a Chamberlain garage remote, first locate the "Learn" button on the garage door opener. Press and release this button, then within 30 seconds, press and hold the button on the remote you want to program. Release the button when the garage door opener lights blink. Your remote should now be programmed.
How do you program the Xbox 360 remote?
press little button on the xbox then on the same little button on remote shows it on instructions
What are the codes for a proscan tv remote?
I had the same problem with my proscan 40lc45s and the remote from comcast. I called proscan at 888-977-6722. They were very helpful. Codes 10178, 10029, 10030 and 10019 all worked. Hope this helps
How can I program a Chamberlain remote?
To program a Chamberlain remote, you typically need to locate the "Learn" button on the garage door opener unit, press it, and then press the button on the remote you want to program. This will sync the remote with the opener. Refer to the specific instructions provided by Chamberlain for your model for detailed steps.
How do you program a trisonic universal remote model ts-rc488?
PROGRAM A TRISONIC UNIVERSAL REOMTE TS-rc 411
How do you program an RCA universal remote without a program code?
how to program my tv with the RCA D 770 - universal remote control which has no code search button
How can I program a remote garage door opener?
To program a remote garage door opener, follow these steps: Locate the "learn" button on your garage door opener unit. Press and release the "learn" button. Within 30 seconds, press and hold the button on your remote that you want to program. Release the button when the garage door opener lights flash or you hear a click. Test the remote to ensure it is programmed correctly.
How long do you need to hold down the program button for the garage remote to program?
2.7 seconds.
How can I program a remote for a Chamberlain garage door opener?
To program a remote for a Chamberlain garage door opener, you typically need to locate the "Learn" button on the opener unit, press it, and then press the button on the remote you want to program. This will sync the remote with the opener. Refer to the specific instructions in your Chamberlain opener manual for detailed steps.
How can I program a remote to a Chamberlain garage door opener?
To program a remote to a Chamberlain garage door opener, you typically need to locate the "Learn" button on the opener unit, press it, then press the button on the remote you want to program. This will sync the remote with the opener. Refer to the specific instructions in your Chamberlain opener manual for detailed steps.
How can I program a Chamberlain garage door opener remote?
To program a Chamberlain garage door opener remote, you typically need to locate the "Learn" button on the opener unit, press it, and then press the button on the remote you want to program. Follow the specific instructions in your opener's manual for detailed steps.
