There are separate flasher relays for the hazard lights and turn signals. The flasher relay may be out on your blinkers. The relay for the hazards is behing the fuse box. The relay for the blinkers is behind the lower dash panel to the right of the steering column.
It was lit by candles and sun lights
Lights that are mounted on walls are called sconces.
just face away from the lights or tell them to turn the lights off
'Footlights' are also called 'Klieg lights'.
no because they had no technology and electricity in the 1600.they used candle lights in that time
20 amp square 2 prong fuse
It has been my experience that when the blinker comes on but the lights don't blink there is one or more bulbs burned out. If that is not the case check the flasher.
Often this type of behavior is caused by a bad ground for the lighting circuit. Check the ground circuit for the brake lights.
Check grounds Check loose wire on switch Check defective switch
The tail lights are on a separate wiring than the blinker/brake lights. Look for a blown fuse or a broken/loose wire.
cheack the wireing
Probably Flasher
whats the color circuit for the blinkers an break lights?
Check for a bad ground
on blinker switch
Press both blinker directions at the same time.
emergency blinker