Left Front, Center, Right Front, Right Rear, Left Rear, Center Rear on some units and the Sub- woofer. Most sub-woofers have their own built in amplifier and should be connected to the Sub Output connector on the Home Theater unit.
The most common cause is bad wiring. Check the connections or replace the speaker wiring. If that does not work, check which speaker has the problem and see if a cone is blown. To do this, place your ear near the cone and gently press it in (don't push to hard). If the cone is blown you will hear a raspy rubbing sound when the cone moves. Replace the cone or the speaker if it is blown. If this does not work, change your speaker connections around to see if it is the amplifier.
the speaker can often count on the audience to make the connection between the words in the speech and the context in which he or she is speaking.
Humming can be the result of several things. One is called "ground loop noise" which has to do with the electricity. Try changing outlets or buying a filter (type of surge suppressor made for home audio). Monster Cable makes variants that are designed for subs. The other cause is bad connections with your wire. If you are either using speaker level connections or RCA wires, check the connections or change out the cable and see if that works.
The best speaker system is the Klipschorn Floorstanding speaker. They cost about $4000.00 per speaker.
There is no agreed convention for speaker color coding. Most users and most manufacturers will take the striped core as the "+" side and the black or plain as the "-" side. It makes no difference to the connections how the cable is connected but in a system, make sure that all the amplifier terminals are connected to all the speakers with the same polarity. Almost all amplifier and speaker connectors that have red and black terminals will use red as the "+". Therefore, connect the red terminal to the red terminal and the black to the black. It makes no difference which core of the cable is used. If different speaker manufacturers are being used in a single system, it is possible that the wiring may be inverted on one type compared to another. Wiring a speaker with the polarity inverted will never damage the speaker but it does affect the sound quality when used with other speakers. Most of the better speaker manufacturers will state the polarity of the connectors in their manuals. Look for a statement like "A positive voltage on the red terminal will produce a forward movement of the speaker cone". If you are able to confirm this detail for all speakers, getting the polarity right is simple. Although speaker connectors are often referred to as positive and negative, the signal is AC and therefore the terms are not strictly correct. The terms work for the purposes of connecting speakers so there is no need to correct the terminology.
Repair the broken connections.
To fix a damaged speaker in your audio system, you can try the following steps: Check the speaker connections to ensure they are secure. Inspect the speaker for any visible damage such as tears or holes in the cone. If there is visible damage, consider replacing the speaker or repairing it if possible. Test the speaker with different audio sources to determine if the issue is with the speaker or the audio system. If the speaker still does not work, consult a professional for further assistance.
speaker connections
If there is power in the radio but the system is lacking sound then there is a problem with the speaker connections. On the 1997 Dodge Dakota check the speaker connections with a spark tester. If no spark trace the wires to find any loose or incorrect connections.
Each speaker has different colors from every other speaker. Which speaker do you need? Each speaker has different colors from every other speaker. Which speaker do you need?
Positive and negative speaker wire connections differ in their impact on audio quality. Positive connections carry the audio signal, while negative connections complete the circuit. Properly connecting positive and negative wires ensures accurate sound reproduction. Incorrect connections can result in phase issues, distortion, and reduced audio quality.
Donald Sutherland
45 watt output to each of four speaker connections
Your amp may sound fuzzy due to issues like a faulty cable, dirty connections, or a damaged speaker. To fix it, try cleaning the connections, replacing the cable, or checking the speaker for damage. If the issue persists, consult a professional technician for further assistance.
The most common cause is bad wiring. Check the connections or replace the speaker wiring. If that does not work, check which speaker has the problem and see if a cone is blown. To do this, place your ear near the cone and gently press it in (don't push to hard). If the cone is blown you will hear a raspy rubbing sound when the cone moves. Replace the cone or the speaker if it is blown. If this does not work, change your speaker connections around to see if it is the amplifier.
A socket is distinguished by a combination of IP address and port number - both for the origin and for the destination. So, two connections will be different connections, if any of these are different.A socket is distinguished by a combination of IP address and port number - both for the origin and for the destination. So, two connections will be different connections, if any of these are different.A socket is distinguished by a combination of IP address and port number - both for the origin and for the destination. So, two connections will be different connections, if any of these are different.A socket is distinguished by a combination of IP address and port number - both for the origin and for the destination. So, two connections will be different connections, if any of these are different.
Check for loosed connections. wire, Speaker's, exc.