answersLogoWhite

0

Because of liability concerns, most manufacturers do not provide specifications on the size of screws or mounting instructions for their televisions. Virtually all TV wall mounts come with a large assortment of screws to fit all TVs with standard VESA mounts. A 37-inch TV will use a M6 (6mm metric) or M8 (8mm metric) screw. The mount will have these screws in various lengths. When you get the mount, use the longest screw possible that you can tighten by hand to hold the bracket to the back of the TV. Do not over-tighten, as you may damage circuit boards or even the LCD panel itself.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What size screw do you use to mount a samsung led tv 40 inch 6300 series?

A M8x19 screw (metric 8mm thread x 19mm length) is used to secure the 6300 series TV to a VESA wall mount. You will need 4 to mount it.


What screw size do I need for 32 sony bravia wall mount The screws that actually go in the wall?

The screw size needed for your Sony Bravia walmaount for a 32 inch is 6X16 MM screws. These are the screws that go into the walls.


Can you put 20 inch tires on 15 inch rims?

Of course not. You need 20 inch wheel to mount 20 inch tires.


How do you hang a Craig 32 inch tv The holes on the mount do not match the holes on the tv.?

To hang a Craig 32-inch TV when the mount holes do not align, first check if your TV has a standard VESA mounting pattern. If not, you may need an adapter plate that fits the TV's holes and aligns with the mount. Ensure the mount is securely attached to the wall, then use the adapter to connect the TV to the mount. Finally, double-check for stability before letting go of the TV.


What size screws are required to mount your 50 Panasonic TV?

I cannot tell you the size of the holes but I can tell the type of screws you would need; M8, 1.25mm thread pitch. Min depth-0.67", max depth-1.38". Hope this helps!


How do you mount subwoofer?

To often mount a subwoofer you will need your desired subwoofer box of choice. Once you have decided what type of box you want, then you will need to take your subwoofer and insert it into the subwoofer hole. Then you screw it down. Once this is done you take your wires and run it into the subwoofer. An amplifier is not necessarily needed, but you'll definitely want one. You will then take your amplifier and connect it to your cars battery, and then also ground it to your car.


What size screw to mount an LG 50PA5500?

To mount an LG 50PA5500 TV, you typically need M6 screws for the VESA mount. The screw length can vary depending on the thickness of the mounting bracket, but lengths of 30mm to 50mm are commonly used. Always refer to the TV's user manual for specific recommendations related to your mounting setup.


What size flat wall mount would I need to buy to hang this 52inch tv?

The size of wall mount you need is around 50 inch wall mount or higher. For the sake of being sure, you may need to ask a professional for assistance on the subject. Good Luck on finding your answer.


What tools will I need to install this wall mount at my home?

The wall mount comes with studs and plate required . You shall nee an electrical drill, hammer and power screw driver/ spanner for installition.


How easy is the installation for this TV mount?

Generally installation for any TV mount is easy, this one follows that trend. Pretty much you just need to screw it into the studs. Pretty easy stuff.


How can I connect a microphone with an XLR output to a device with a 1/4-inch input?

To connect a microphone with an XLR output to a device with a 1/4-inch input, you will need an XLR to 1/4-inch adapter or cable. Simply plug the XLR end into the microphone and the 1/4-inch end into the device to establish the connection.


You tried to replace the fan blower in your 2001 Dodge Grand Caravan It seems there is a screw in the back that neither you nor your mechanic was able to remove to enable him to get to the fan blower?

For that screw, you need to use a 5/16 (or 8mm) swivel 1/4 inch socket on a 6 inch extension and ratchet. You also need a mirror and flashlight to get the socket on the screw...the rest is patience and determination. For some of the vans from that era that screw is installed from the top. The dash has to be removed to change it.