answersLogoWhite

0

Henry James wrote The Turn Of The Screw.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How can I take out a stripped screw effectively?

To remove a stripped screw effectively, you can try using a rubber band, a screw extractor tool, or a rotary tool with a cutting wheel. Place the rubber band over the screw head to provide extra grip, use the screw extractor tool to grip and turn the screw, or carefully cut a new slot with the rotary tool to turn the screw out.


How can I effectively take out a stripped screw?

To effectively remove a stripped screw, you can try using a rubber band or a screw extractor tool to get a better grip on the screw head and turn it counterclockwise. Alternatively, you can use a drill to create a new groove in the screw head and then use a screwdriver to turn it out.


How can I properly install a screw into an inset screw hole?

To properly install a screw into an inset screw hole, align the screw with the hole and gently turn it clockwise using a screwdriver until it is securely in place. Be careful not to overtighten the screw, as this can damage the material around the hole.


How can I effectively pull out a stripped screw?

To effectively remove a stripped screw, you can try using a rubber band, a screw extractor tool, or a rotary tool with a cutting wheel. Place the rubber band over the screw head and use a screwdriver to grip and turn it. Alternatively, use a screw extractor tool to grip the screw and turn it counterclockwise. If all else fails, carefully cut a slot into the screw head with a rotary tool and use a flathead screwdriver to turn it out.


When was The Turn of the Screw created?

The Turn of the Screw was created on 1898-10-13.


How do you change door cylinder?

If it's a Euro Cylinder just unscrew the screw holding it in place, turn the key slightly until you can pull the cylinder out. Put the new cylinder in and replace the screw to hold it in place.


How can I remove stripped Phillips head screws effectively?

To remove stripped Phillips head screws effectively, you can try using a rubber band or a screw extractor tool. Place the rubber band over the screw head and then use the screwdriver to grip and turn the screw. Alternatively, use a screw extractor tool to grip the screw and turn it counterclockwise to remove it.


How can I remove stripped screws effectively?

To remove stripped screws effectively, you can try using a rubber band or a screw extractor tool. Place the rubber band over the screw head and use a screwdriver to grip and turn it. Alternatively, use a screw extractor tool to grip the stripped screw and turn it counterclockwise to remove it.


How can I effectively remove stripped screws?

To effectively remove stripped screws, you can try using a rubber band or a screw extractor tool. Place the rubber band over the screw head and use a screwdriver to grip and turn it. If that doesn't work, use a screw extractor tool to grip the screw and turn it counterclockwise to remove it.


Why do you hear a plastic rubbing noise when you turn left and only left?

The inner fender is plastic and obviously has come loose. Take off the tire and put a screw to hold it into it's place.


Where does the saying turn of the screw come from?

"a turn of the screw" is an idiom that means...(From http://idioms.thefreedictionary.com/a+turn+of+the+screw)a turn of the screwan action which makes a bad situation worse, especially in order to force someone to do something Each letter from my bank manager is another turn of the screw.


Which way do you turn the idol screw on a fourwheeler to go down?

You turn the screw in to idol down