4core*240mm square..
35 KVA generator using for load 100 meter length which cable need to used
To determine the kVA rating of a generator that delivers 500 amps, you can use the formula: kVA = (Amps × Voltage) / 1000. For example, at a standard voltage of 480V, the calculation would be kVA = (500A × 480V) / 1000, resulting in 240 kVA. Therefore, a generator rated at approximately 240 kVA can deliver 500 amps at 480 volts. Adjust the voltage accordingly if a different voltage level is used.
It depends totally on the voltage used.
A 10 mm cable is most commonly used for a 500 KVA transformer, 240 volt, 3 phrase. The size of the wire that is used in a transformer is based on the voltage.
500 kva is about 500 hp , rule of thumb is 10% of hp is equal to liters of deisel consumption/hour . therefore , 500 kva uses 50 liters of deisel per hour approximatle.
635kva
The oil perisher for 1500 KVA generator is used for the lubrication purposes.
The Perkins 100 KVA generator uses approximately 23.8 Liters per hour. The Perkins KVA generator can be purchased at any Perkins licensed dealer.
How much KVA generator is required to run two AC of 1.5 tone
MGS1500HV is the oil pressure for a 1500KVA generator.
The operating temperature for a 1500 kVA diesel generator can vary depending on the specific model and manufacturer. It is important to check the manufacturer's specifications for the specific generator model to confirm its exact operating temperature range.
No, the generator is too small.