0
What else can I help you with?
When traveling uphill with the driver need to use high gears to overcome the pull of gravity?
Yes, when traveling uphill, it is generally recommended to use lower gears to maintain power and torque to overcome the pull of gravity. This will prevent the engine from straining and provide better control of the vehicle.
When driving downhill your vehicle will accelerate and start moving fast due to?
the force of gravity pulling the vehicle downhill and overcoming the resistance of friction and air resistance. Gravity increases the vehicle's speed as it descends, requiring the driver to use braking or engine resistance to maintain control and prevent the vehicle from accelerating too quickly.
Traveling at high speed requires?
Traveling at high speed requires a skilled and experienced driver, proper road conditions, and a vehicle that is well-maintained and designed for high-speed travel. Safety precautions such as wearing a seatbelt and obeying speed limits are also essential.
One word problem that demonstrates negative acceleration?
A car travels at 30m/s and the driver sees a stoplight turn green 35ms ahead. If the driver immeditly steps on the break, what is the minimum acceleration needed from the brakes to stop in time. All information needed is given except final velocity which can be assumed to be zero. This is a problem I made up, if one is needed out of a textbook, look for any problem where an object is either slowing down, or moving towards the point of reference.
When another driver travels at erratic speeds?
If you encounter a driver traveling at erratic speeds, keep a safe distance, avoid aggressive actions, and be prepared for sudden maneuvers. It's important to stay focused, alert, and ready to react if their unpredictable driving behavior poses a risk to your safety. If necessary, consider reporting the driver to the authorities.
When traveling uphill with the driver need to use high gears to overcome the pull of gravity?
Yes, when traveling uphill, it is generally recommended to use lower gears to maintain power and torque to overcome the pull of gravity. This will prevent the engine from straining and provide better control of the vehicle.
How fast do cars go when downhill?
Whatever speed they're allowed by the driver of the vehicle.
When should a driver will use the 2?
Driver use gear 'L' or '2' when driving uphill or downhill which required higher gear ratio to move the uphill. Downhill wise, driver use '2' or 'L' for safety purpose. The low gear ratio will use the high gear ratio to slow down the speed of driving downhill and creating 'pulling' force on your car to safety purposes. Gear '2' can be use for overtaking on the highway too provided at the appropriate speed.
Which windows tool can be used to identify a driver that is causing a problem by putting stress on selected drivers causing a problem driver to crash?
Driver verifier
The velocity of sound in air is 343 ms An ambulance is traveling east at 64.9 ms Behind it there is a car traveling along the same direction at 29.8 ms The ambulance driver hears his siren at a?
afrequency of the same as siren frequency as ambulance is the source and the observer this is not Doppler effect problem
A driver is traveling at 60 km is the driver speeding if the speed limit is 45 mph?
A driver is not speeding at 60 km/h while traveling in a 45 m/h zone.At 60 km/h the driver will only be going 37m/h.72 km/h is approximately 45 m/h.
Is there an international driver's license available for individuals to use when traveling abroad?
Yes, an international driver's permit (IDP) is available for individuals to use when traveling abroad. It translates your driver's license information into multiple languages and is recognized in many countries as a valid form of identification for driving.
A traveling condition considered a driver's nightmare?
in winter when the rouds are icey
Q is traveling at 50 mph. You are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q?
Q is traveling at 50 mph. You are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q? When To Pass Driver QQ is traveling at 50 mph. You are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q? Q is traveling at 50 mph. You are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q? Q is traveling at 50 mph. You are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q?Q is traveling at 50 mph. You are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q? darielstanley1926@gmail.comQ is traveling at 50 mph. You are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q?ou are Driver Z, passing Driver Q at 60 mph. When is it safe to pull back in front of Driver Q? It is generally not safe to try to pass another vehicle and then immediately pull in front of them, especially if you are traveling significantly faster than the other driver. Doing so can cause a collision if the other driver is not expecting it, or if they are unable to slow down in time to avoid you. It is important to always use caution when passing another vehicle and to make sure that you have plenty of space and time to complete the maneuver safely. This means waiting until you can see that you have a clear path ahead and that it is safe to pull in front of the other vehicle before you do so. In this situation, it would be best to wait until you have a significant distance between you and Driver Q before attempting to pull back in front of them. This will give you time to safely merge back into the lane and ensure that you are not cutting off the other driver
Which Windows tool can be used to identify a driver that is causing a problem by putting stress on selected drivers causing the problem driver to crash?
verifier
Why the driver do not full the gas tank when traveling far?
A driver may not fill their gas tank when they are traveling far because they enjoy stopping a gas stations for a break. It is important to rest every few hours when taking a long trip.
A car traveling at a velocity of 50 mph crashed into a brick wall What is the velocity of the driver the moment after impact if the driver was not wearing his seatbelt?
55mph (studyisland)
