0
Driver use gear 'L' or '2' when driving uphill or downhill which required higher gear ratio to move the uphill. Downhill wise, driver use '2' or 'L' for safety purpose. The low gear ratio will use the high gear ratio to slow down the speed of driving downhill and creating 'pulling' force on your car to safety purposes. Gear '2' can be use for overtaking on the highway too provided at the appropriate speed.
What else can I help you with?
Can you use your driver in the rough?
u could but u should really use a wedge
How often should you take a break from driving to avoid driver fatigue in Canada?
A driver should take a break when he/she is fatigued. It is recommended that a driver take a break every 2 hrs
When should a driver use their signals?
Whenever you are turning or changing lanes.
How do you enable use graphics processor?
The graphics processor should already be in use if your driver is installed. if the driver is not installed then you can download and install it from the respective processor brand.
When should a driver use headlights?
when its dark, dummy
What grade of oil should you use?
As recommended by the manufacturer. Your driver's manual will have that information.
Do you use an apostrophe in the word Drivers license?
Yes. It should be driver's license.
How do you use 2 hard disk?
how do connect two hard driver
When should a vehicle driver will use the auto gear function 2 and L?
In poor driving condition such as snow, #2 can be useful. An example of using L would be when pulling a boat out of the water on a boat ramp.
How do you use a flash media driver with your laptop?
On the laptop, there should be 2 USB ports located on the back. Plug the Flash Drive into this port to access. It will create another drive on your computer
When you overtake another vehicle at night why should you use your low beams?
You should use your low beams to avoid blinding the driver ahead as you lights reflect in his mirrors.
Where are the fuses on Audi a4 located?
There are 2 lots of fuses 1 is inside the car at the side of the dash board on driver side,use a screw driver 2 open the panel then your fuses are there ready 2 change.The other fuses are under the bonnet these should not blow OS they are alot more powerful compaired to the ones inside the car.
