Its safer for the seat to be facing backwards, because during a collision or an abrupt stop the infant would not be able to slip out of the car seat, and also so the infant will not choke on the car seat's seat belt. It is also safer to have an infant/child to be sitting in the back seat and not in the front passenger seat until the recommended age.
Sort of. If you slam on the brakes of your car, the car slows down. But in the coordinate system of the things inside the car, you appear to accelerate out of your seat and through the windscreen.
Seat belts aid in the prevention of passenger ejection during collisions. They also restrain passengers into safer sections of the automobile in the event of a crash, as sections of the vehicle are designed to crumple to dissapate energy and the limbs of an unrestrained individual could inadvertantly travel into such sections and be crushed or severed. Seat belts rarely ride down on a person when properly adjusted for their size. Belts should always be snug across the body of a passenger.
The front seat of the car.
the front seat of the car I think.....
Whenever you are adjusting your seat you must check all mirrors in your car. If you don't have a clear view in the mirrors, then you must adjust them before you start driving. Always!
Lock your door and insert your key, adjust your seat, adjust your steering wheel, adjust your mirrors, then fasten seat belt.
A Volkswagen Jetta's wing mirrors can be adjusted manually or with power controls, depending on the car's options. Sit in the driver's seat, and adjust the mirrors to see behind?æwhile you are in a typical driving position.
There is a compartment box between the driver seat and the passenger seat. At the bottom of the box you can find the adjusting nut.
Gauges, seat belt, mirrors,
Can adjust a self adjusting cable
You should always check your gauges, seat belt, and mirrors after you start your car.
Adjust your seat,buckle up,adjust the mirrors,eye ball the gauges,signal your intentions,shift into gear,merge into traffic when safe to do so.
The set button is to set your mirrors and seat to a specific setting. adjust seat and mirrors to your driving preference & press set 1 or 2. if seat and mirrors are moved to another driver's settings, upon hitting the corresponding number programmed to your settings it will move the seat and mirrors back to the originally programed position.This post was edited from a previous post giving directions on programming keyless entry.
with the car in park, and the ignition on. adjust the seat to a comfortable position and adjust the mirrors so that you can see. hit the "MEMO" button on the memory seat switch panel and immediatly after hit either "position 1" or "position 2". it will store settings for mirrors and seats for each position so 2 total. after you push MEMO don't adjust any setting as this will make you exit program mode.
You can calibrate your seat 12 Caterpillar diesel engine by adjusting the fuel valves. You will also need to adjust the fuel injectors.
Set your seat in your suited position by the finger controls, also adjust two side mirrors. There is a small rectangular box that has "1-2-set" There with the controls. After you have adjusted everything press"Set", then the number 1. Then all you have to do is press number 1 to have the seat and mirrors adjust automatically to your desired setting. The number 2 is for a second driver. Just repeat the same steps.