0
Bullets will drop almost the same vertical distance in equal time. The limitation is the vertical drag force on the bullet. If fired in a flat trajectory, a bullet will start with no vertical velocity. As it continues on its path however, the force of gravity will impart some vertical velocity to it. Initially the vertical component of the drag force will be negligible, but the longer it flies, the faster it drops. At some point the drag force becomes noticeable and the roughness of the bullet surface and geometry of the bullet begin to play a role in how much vertical drag force is exhibited. Most of the time a bullet will hit its target before this effect makes much difference, but if you fired two different bullets from the top of a very high mountain and tracked their flight you would probably find them dropping at different speeds towards the end of their flight.
What else can I help you with?
What is the average time for one drop to fall through a vertical distance?
The average time for a drop to fall through a vertical distance depends on factors like drop size, air resistance, and gravity. However, for small drops falling in a vacuum, it can be calculated using the equation t = sqrt(2h/g), where t is the time, h is the distance, and g is the acceleration due to gravity.
What is the total vertical up-and-down this traveled from the moment it dropped to the mowing to hit the floor for the fourth time?
To calculate the total vertical distance traveled, we can sum the distances for each drop. Since the ball reaches half the height from the previous drop, the total distance traveled can be calculated using the formula: initial drop height + initial drop height/2 + initial drop height/4 + initial drop height/8.
How do you calculate the vertical drop of an object travelling horizontally at 101 mph?
It depends because horizontal velocity does not affect vertical velocity at all! Example: If you took a bullet and shot it out of a gun at a perfectly horizontal angle (0 or 180 degrees) and dropped another bullet from the same height of the gun barrel, both bullets would hit the ground at the same time.
What is a drop height in physics?
In physics, drop height refers to the vertical distance an object falls under the influence of gravity. It is commonly used to calculate potential energy, kinetic energy, and impact force of a falling object. The higher the drop height, the greater the potential energy and impact force upon landing.
A rifle is fired at a distant target and bullet is fired horizontally from a gun you drop a bullet from the height of the barrel if there ain't air resistance which bullet hits the ground 1st explain?
Both bullets would hit the ground at the same time, regardless of their initial velocities. This is due to the fact that in the absence of air resistance, the only force acting on the bullets is gravity, which causes all objects to fall at the same rate regardless of their mass or initial velocity.
What is the vertical drop of a stream channel over a certain distance called?
The vertical drop of a stream channel over distance is known as the Gradient.
What is the vertical drop of a stream channel over a certain distance is called what?
The vertical drop of a stream channel over distance is known as the Gradient.
The vertical drop of a stream channel over a certain distance is called the?
The vertical drop of a stream channel over distance is known as the Gradient.
Is the vertical drop of a stream channel over a certain distance?
Yes, the vertical drop of a stream channel over a certain distance is referred to as the stream's gradient or slope. It is calculated by measuring the change in elevation (vertical drop) divided by the horizontal distance over which this drop occurs. This gradient influences the stream's flow velocity and erosion potential, affecting the surrounding landscape and ecosystem. A steeper gradient typically results in faster flowing water and greater erosion.
What is the average time for one drop to fall through a vertical distance?
The average time for a drop to fall through a vertical distance depends on factors like drop size, air resistance, and gravity. However, for small drops falling in a vacuum, it can be calculated using the equation t = sqrt(2h/g), where t is the time, h is the distance, and g is the acceleration due to gravity.
What is a 3 degrees fall over a distance of 4m?
A 3-degree fall over a distance of 4 meters refers to a slope that descends at an angle of 3 degrees across that horizontal distance. To calculate the vertical drop, you can use the formula: height = distance × sin(angle). In this case, the vertical drop would be approximately 0.21 meters (or 21 centimeters).
What is the total vertical up-and-down this traveled from the moment it dropped to the mowing to hit the floor for the fourth time?
To calculate the total vertical distance traveled, we can sum the distances for each drop. Since the ball reaches half the height from the previous drop, the total distance traveled can be calculated using the formula: initial drop height + initial drop height/2 + initial drop height/4 + initial drop height/8.
How does the horizontal distance a projectile falls below an otherwise straight line path compare with the vertical distance it would fall from rest in the same time?
The horizontal distance a projectile falls below an otherwise straight-line path is equal to the vertical distance it would fall from rest in the same time due to the independence of horizontal and vertical motions. In projectile motion, the horizontal component moves at a constant speed while the vertical component is influenced by gravity. Therefore, the vertical drop in a given time interval is determined solely by the acceleration due to gravity, which is the same regardless of the horizontal motion. As a result, the horizontal and vertical displacements can be analyzed separately, leading to this direct comparison.
This term is the slope of a stream channel expressed as the vertical drop of a stream over a specified distance?
The term is known as stream gradient, which represents the steepness of a stream channel and is calculated as the vertical drop of a stream over a specific horizontal distance. It is expressed in feet per mile or meters per kilometer.
How much is a 3 degree fall over 1 meter?
To calculate the vertical drop over a given horizontal distance due to a slope, we use the formula: vertical drop = horizontal distance * tan(slope angle). Given a 3-degree slope over 1 meter, the vertical drop would be 1 meter * tan(3 degrees), which is approximately 0.0524 meters or 5.24 centimeters. This means that for every 1 meter of horizontal distance, the elevation would decrease by about 5.24 centimeters.
How to calculate manhole pipe slope?
To calculate the slope of a manhole pipe, measure the vertical drop between the inlet and outlet pipes and the horizontal distance between them. The slope is determined by dividing the vertical drop (in inches or feet) by the horizontal distance (in the same units). For example, if the vertical drop is 2 feet and the horizontal distance is 20 feet, the slope would be 2/20, or 0.1, which translates to a 1:10 slope. It's essential to maintain the proper slope to ensure effective drainage and prevent blockages.
What is drop on a gun?
The BULLET drop is the pull of gravity on the bullet as it is shot, resulting in the bullet lowering in altitude over a long distance. This is what long-distance shooters have to account for on their scopes. Different types of bullets with different weights, sizes, and shapes, as well as the barrel length and rifling ratios, affect how much the drop will be.
