psi = Pounds / sq. inch = unit of Pressure
lb = Pounds = Unit of weight
Use this formula: psi x 0.07031 = kg/cm270 psi x 0.07031 = about 4.921 kg/cm2
To convert 0.50 MPa to psi, you can use the conversion factor: 1 MPa is approximately equal to 145.038 psi. Therefore, 0.50 MPa is approximately equal to 72.519 psi.
PSI in Earthbound is a type of psychic power that characters in the game can use for various attacks and abilities. It stands for Psychic Points. Each character has their own unique set of PSI abilities they can use in battles.
To convert psi (pounds per square inch) to atm (atmospheres), you can use the conversion factor of 1 atm = 14.6959 psi. So, you would divide the psi value by 14.6959 to get the equivalent value in atmospheres.
To convert a pressure value from pascal to psi, you can use the conversion factor of 1 pascal is equal to 0.00014503773773 psi. Simply multiply the pressure value in pascal by this conversion factor to get the equivalent value in psi.
3000 psi concrete weighs Approx 3900 Lb/yd3
Um... there are 1 psi (lb/in2) = 144 psf (lbf/ft2) , if by (lb ft) you meant pounnds per square foot. then there is 1/144 psi in 1 (lbf/ft2)
There are 13.8888888889 psi in a ton. There are 2000 pounds in 1 ton and a long ton weighs about 2200 pounds.
Converting kilograms (kg) to pounds (lb) and then to pounds per square inch (psi) involves using the conversion factor that 1 kg is approximately equal to 2.20462 lb. Therefore, to convert 12 kg to psi, you would first convert 12 kg to pounds (12 kg * 2.20462 lb/kg) and then divide by the area in square inches. The final calculation involves dividing the weight in pounds by the area in square inches to get the pressure in psi.
32---35 psi idle +8psi under load
20 ft of head can be easily converted to psi by using the specific weight of water: 62.4 lb/ft3 and converting the units to inches. 20ft * 62.4lb/ft3 / 144in2/ft2 = 8.67 psi
There is no paintball gun that runs on only 200 psi.
Both front and rear should be 2.0 BAR (or 28-29 lb psi).
Most Kenworth radiators are 15 psi.
To calculate the psi (pounds per square inch) exerted by an 80,000 lb 18-wheel semi-trailer on the ground, you need to consider the number of wheels and the total weight. If the trailer has 18 wheels, the weight per wheel is 80,000 lbs divided by 18, which is approximately 4,444 lbs per wheel. The psi can be calculated by dividing the weight per wheel by the contact area of the tire; for example, if a typical semi-truck tire has a contact patch of about 100 square inches, the psi would be approximately 44.44 psi.
smyd
Use this formula: psi x 0.07031 = kg/cm2