0
What else can I help you with?
What is the difference between effective viscosity and apparent viscosity for Non newtonian fluid?
Effective viscosity refers to the equivalent viscosity of a non-Newtonian fluid under specific flow conditions, while apparent viscosity is a term used to describe the measured viscosity of a non-Newtonian fluid, which may vary depending on the test method used. The effective viscosity takes into account the non-linear behavior of the fluid, while the apparent viscosity provides a simplified representation of its flow properties.
How can one determine viscosity from density?
Viscosity cannot be directly determined from density. Viscosity is a measure of a fluid's resistance to flow, while density is a measure of how much mass is contained in a given volume. While there may be some correlation between viscosity and density for certain substances, viscosity is influenced by other factors such as temperature and pressure. To determine viscosity, specific tests or measurements need to be conducted using viscometers or other appropriate methods.
What is the difference between viscosity and gravity?
Viscosity refers to a fluid’s resistance to flow, while gravity is a force that attracts objects towards each other. Viscosity is a measure of how “thick” or “runny” a fluid is, while gravity influences the weight and movement of objects on Earth.
What is the viscosity cSt of 2 diesel fuel -20 deg F?
The viscosity of No. 2 diesel fuel at -20°F is typically around 4.0-6.0 cSt (centistokes). However, it's important to note that the exact viscosity can vary depending on the specific blend and composition of the diesel fuel.
What are the main differences between viscosity and friction?
Viscosity is a measure of a fluid's resistance to flow, while friction is the resistance encountered when two surfaces move against each other. Viscosity depends on the internal friction within a fluid, while friction is a force that opposes motion between surfaces. Viscosity is specific to fluids, while friction can occur in both solids and fluids.
What is the Viscosity of 60 sugar and 40 water solution?
The viscosity of a 60% sugar and 40% water solution will depend on factors such as temperature and sugar concentration. Generally, increasing the sugar content will increase the viscosity due to the additional dissolved solids in the solution. It is recommended to use viscosity measurements to determine the exact viscosity of a specific solution.
What other elements are in the compound ammonia cleaning solution?
In addition to ammonia, the compound ammonia cleaning solution may also contain water and other ingredients, such as surfactants or fragrances, depending on the specific formulation. These additional elements help enhance the cleaning performance and may contribute to the overall effectiveness of the solution.
What is Sodium sulfite solution viscosity at 20 degree Celsius temperature?
The viscosity of sodium sulfite solution at 20 degrees Celsius can vary depending on its concentration. Typically, sodium sulfite solutions have low to moderate viscosities at this temperature due to their liquid state. Additional factors such as the specific concentration and presence of impurities can also influence the viscosity of the solution.
Is orthoclase heterogenous mixture solution compound or element?
its not an element, therefore it is a compound
What is the process to calculate the specific rotation of a compound?
To calculate the specific rotation of a compound, you need to measure the observed rotation of a solution of the compound in a polarimeter, and then use the formula: specific rotation observed rotation / (concentration x path length). The observed rotation is the angle of rotation measured in degrees, the concentration is the concentration of the compound in the solution in g/mL, and the path length is the length of the polarimeter tube in decimeters.
Which is easiest to separate solution compound mixture or element?
The answer is very specific for each practical case !
Is sulfuric acid an element a compound a solution or a heterogeneous?
Sulfuric acid is a compound because it is composed of multiple elements (sulfur, hydrogen, and oxygen) chemically bonded together in a specific ratio. It is not an element, solution, or heterogeneous mixture.
When elements chemically bond together they make a?
compound is when two or more elements combine chemically
What is ml in mooney viscosity?
In Mooney viscosity, ML stands for Mooney units, which is a measure of viscosity obtained from a Mooney viscometer. It reflects the resistance to deformation of a rubber compound at a specific temperature and shear rate. A higher ML value indicates higher viscosity or stiffness of the rubber.
Is there a correlation between viscosity and specific gravity?
No
Is silver nitrate solution a compound element or mixture?
Silver nitrate solution is a compound, as it is made up of silver, nitrogen, and oxygen atoms bonded together in a specific ratio (AgNO3). It is not a mixture because its composition is fixed and cannot be easily separated into its individual components.
What does the solution turned blue but remained clear mean?
If a solution turns blue but remains clear, it could indicate the presence of a blue chemical compound that is soluble in the solution. The clarity of the solution suggests that the compound is well dissolved and uniformly dispersed in the liquid. This observation could be of interest for identifying specific substances through chemical reactions or tests.
