0
What else can I help you with?
Can a thermometer record the temperature of boiling pot?
Yes, a thermometer can record the temperature of a boiling pot. By placing the thermometer in the liquid or steam coming from the pot, it can measure the temperature accurately. Be sure to use a thermometer that is designed to measure high temperatures.
How is steam created in a steam engine?
Steam is created in a steam engine by heating water in a boiler until it turns into steam. The steam then builds up pressure, which is used to power the engine and drive machinery.
How is steam made in a steam engine?
Steam in a steam engine is made by heating water in a boiler until it turns into steam. The steam is then directed into a cylinder where it pushes a piston, creating mechanical energy that powers the engine.
What is the effect of dry steam entry in to a wet steam filled vessel whether it promotes condensation in the vessel?
When dry steam enters a wet steam filled vessel, it can cause the wet steam to condense as the dry steam releases its latent heat energy to the surrounding wet steam. This condensation increases the moisture content in the vessel and may lead to water accumulation.
What are some words that create the sound of steam?
There are no words that create the sound of steam, steam is silent.
How do you measure level of tank?
Steam Rate calculation Formula for Steam Turbine
Why we measure conductivity of steam?
We measure the conductivity of steam to monitor its purity and quality. High conductivity in steam can indicate the presence of impurities, such as dissolved solids, which can be harmful to equipment in steam systems. Monitoring conductivity helps in ensuring efficient operation and preventing damage to the system.
A throttling calorimeter is used to measure the quality of?
steam
Why did steam rise off the titanics funnels?
Because the titanics boilers did not measure how much steam was boiling if there was to much steam it would go out the funnels that were 63 feet high.
What is kenotometer?
A kenotometer is an instrument used in steam turbine condensers to measure the vacuum in the steam space of the condenser. The vacuum achieved by the condenser has significant influence on the efficiency of the steam turbine.
How do you calibrate boiler capacity?
Use a good steam flow meter to know the actual steam flow per hour and use a good pressure indicator to measure the steam pressure. Normally these instruments that are used to measure and calibrate the process parameters are, higher accuracy and pre calibrated with certification, and accredited to authorized national laboratory.
How do you calculate steam consumption rate?
There are several ways to calculate the .steam consumption rate. First would be to use a heat transfer equation. Another way would be to measure steam directly using flow metering equipment.
How does trottling calorimeter work?
A throttling calorimeter is a device used to measure the dryness fraction of steam. It works by passing steam through a small nozzle, causing a rapid expansion which results in a drop in pressure and temperature. By measuring the initial and final conditions of the steam, the dryness fraction can be calculated.
What does psi mean on a pressure trol on a steam boiler?
psi is Pounds per Square Inch, and is a measure of the pressure inside the boiler.
When the water boils place a plastic sheet over the beaker to catch the steam why?
Placing a plastic sheet over the beaker helps to trap the steam, preventing it from escaping into the surrounding environment. This can be useful for certain experiments where it's important to capture and measure the amount of steam produced, or to create a controlled environment for the reaction taking place in the beaker.
What is steam accumulator?
A steam accumulator on some once through boilers, with no steam/water drum, is a device similar to a steam separator, which separates the steam and water before the steam is fed to the steam header.
How do you calculate conversion of steam to condensate?
To calculate the conversion of steam to condensate, you can use the formula: Steam Converted to Condensate = Steam Inlet - Steam Outlet This formula subtracts the amount of steam leaving the system (Steam Outlet) from the amount of steam entering the system (Steam Inlet) to determine the amount of steam that has been converted to condensate.
