0
What else can I help you with?
What force keeps the nails and paper clips attached together?
Magnetic force. Nails and paper clips are often made of iron or steel which are attracted to magnets, allowing them to stick together.
How is an open circuit different from a short circuit?
I guess you could call them 'reciprocals' in a sense.-- "Open circuit". . . Has a very high resistance. Nominally infinite.. . . No voltage, no matter how high, is high enough to produce any current through the circuit.. . . Current through it is always zero.. . . Household example: a light switch that's open (labeled OFF in that position).-- "Short Circuit". . . Has a very low resistance. Nominally zero.. . . Any voltage, no matter how small, is enough to produce very high current through the circuit.. . . Household example: toddler stuck a paper-clip into the two holes of the outlet.
What will happen if a paper clip made of metal is placed in an electric circuit?
Metal is an excellent conductor of electricity. So a metal paper clip placed in an electric circuit will conduct whatever current may be in that circuit. If the current is very large, the paperclip may get hot.
What are some temporary magnet example?
Some examples of temporary magnets include iron nails, paper clips, and soft iron. These objects can become magnetized when in the presence of a magnetic field but lose their magnetism once removed from the field.
Why bits of paper fly when you switch the fan on?
When you switch on a fan, it creates airflow which can cause lightweight objects like bits of paper to be lifted and carried by the moving air. This effect is due to the change in air pressure and velocity created by the fan's blades, which creates a force that can lift and move the paper.
What are some uses for small paper bags?
There are many uses for small paper bags. One could use small paper bags for carrying small items such as candy, nails, crayons or miniature water bottles.
Would a4 paper complete a circuit?
No paper is an insulator.
Where can you get the Sally Hansen paper nails in Canada?
in a shpo in canada
Can you use paper collated nails in bostich wire weld nailer?
Yes you can, however they have to be 28 degree paper tape collated. They are not very prevalent, but you can find them. You can not use 30-34 degree paper tape collated nails.
What are the best practices for installing felt paper underlayment with nails?
When installing felt paper underlayment with nails, it is important to follow these best practices: Start at the bottom of the roof and work your way up. Overlap the felt paper sheets by at least 2 inches. Use galvanized nails to secure the felt paper, placing them every 6-8 inches along the edges and every 12 inches in the field. Avoid overdriving the nails, as this can tear the felt paper. Trim any excess felt paper at the edges to ensure a neat and secure installation.
What size nails are used for roofing felt paper?
You can use roofing nails, but most people use a stapler, it's cheaper and faster. The felt paper is just a base for the shingles/tiles.
What force keeps the nails and paper clips attached together?
Magnetic force. Nails and paper clips are often made of iron or steel which are attracted to magnets, allowing them to stick together.
Fan not working on Peugeot 106?
Probably down to a faulty switch, try bypassing the switch by using something metal (paper clip etc) to touch the conectors and complete the circuit while the car is hot enough that the fan should be on. If this solves it you need a new switch. If not look at thermostat?
How do you make the nails from The Hunger Games?
Cotton , paper clips tape.
Is to paper as nail is to wood?
No, paper is a material used to write on, while nails are used to fasten things together. A better comparison would be nail to hammer, as nails are driven into wood using a hammer.
Name something people have to cut?
Hair Grass Paper Meat Nails
What effect would occur if the intermediate switch s3 were replace by a double pole switch?
You seem to be referring about a 3 way lighting circuit. If the cross over switch is replaced with a double pole switch, depending on how the switch was wired into the circuit, the load lamp would either stay on or not light at all. A circuit in a three way configuration has two traveler legs between the two switches The intermediate switch in the circuit just switches the two traveler legs from open to close depending on the position of the other two switched. Google, three way switching, they have many diagrams to work from.
