How to Boil Water in PVC Pipe
I have been building wood steaming boilers, not PVC steam boxes, for about 2-1/2 years now and using PVC to boil the water in and produce steam. I use sch. 40 PVC and the correct cleaner and cement to go with it. PVC is rated at a much lower than it will really handle. I have run this steaming system for more that 12 hours at a time without any problems and complete safety. If you want more info about this, contact: woodsteamingsystems@Yahoo.com. Ernie
The weight of a gallon of water at 229 degrees Fahrenheit would be approximately 8.33 pounds. This is because water's density changes with temperature, and at 229 degrees Fahrenheit, water is less dense compared to when it is at room temperature.
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
About 6.25 pounds per gallon at 72 degrees Fahrenheit.
A US gallon of gasoline weighs approximately 6.3 pounds.
To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.
About 8.35 pounds.
1.5million
The weight of a gallon of water at 229 degrees Fahrenheit would be approximately 8.33 pounds. This is because water's density changes with temperature, and at 229 degrees Fahrenheit, water is less dense compared to when it is at room temperature.
25
74.009 pounds per cubic foot is the density of nitrobenzene at 100 degree Fahrenheit.
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
Assuming you mean "212 degrees Fahrenheit and at sea level". 15.991 ounces, or almost exactly one pound.
One US gallon of gasoline weighs about six pounds.
About 6.25 pounds per gallon at 72 degrees Fahrenheit.
Propane weighs about 4.2 pounds per US gallon, at 60 degrees Fahrenheit. Propane expands 1.5% per 10 degrees F.answered by Special:ContributionsSo you take 4.2 * 47 = about 197.4
You should cook an unstuffed turkey for 15 minutes per pound at 325 degrees Fahrenheit.
If you're in Celsius, 13459.5 Btu's. If you're in Fahrenheit, 12632.5 Btu's.