-- On your paper, draw an 'x' axis and a 'y' axis.
-- Draw a single cycle of the 'sine' function.
-- At the beginning of the cycle, label the point on the x-axis "zero".
-- At the end of the cycle, label the point on the x-axis "1 nanosecond".
A wave with a frequency in the GHz range has a shorter wavelength compared to a wave in the MHz range. This is because wavelength and frequency are inversely proportional: as frequency increases, wavelength decreases.
The wave type with a frequency of 23808 GHz is in the microwave region of the electromagnetic spectrum. This frequency falls in the range of millimeter waves, which are often used in various applications such as wireless communication, radar systems, and imaging technologies.
The frequency of an electromagnetic wave with a wavelength of 1 mm is 300 GHz. This is calculated using the formula: frequency = speed of light / wavelength. Substituting the values in gives us 300 GHz.
The type of wave with the longest wavelength and lowest frequency is a radio wave. These waves have frequencies ranging from about 3 kHz to 300 GHz and are used for various forms of communication, including radio broadcasts and mobile phone signals.
One example of a low frequency wave is a radio wave, which has a frequency range typically between 30 Hz and 300 GHz. These waves are used for broadcasting radio and television signals, as well as for wireless communication.
1 divided by 100,000,000.00 in sec
Microwaves ARE radio waves, with frequencies above 3 GHz.
0.2857 nano Seconds
Assuming you are asking what has a shorter wavelength 1 Mhz or 1 Ghz, then the answer is 1 Ghz. But the way the question was phrased, Mhz or Ghz, well 1000 Mhz is = 1 GHz. Note that 1 hz is just 1 cycle/sec. 1 Mhz is 1,000,000 cycles/sec and 1 Ghz is 1,000,000,000 cycles/sec. So to fit 1000 cycles in one second (as compared to 1 cycle in a second) the cycles have to be shorter (faster up and down sinusoidal wave).
A wave with a frequency in the GHz range has a shorter wavelength compared to a wave in the MHz range. This is because wavelength and frequency are inversely proportional: as frequency increases, wavelength decreases.
300E9 corresponds to a frequency of 300 GHz, which falls in the microwave region of the electromagnetic spectrum.
"Microwave" is the official label for radio between 3 GHz and 300 GHz. That frequency range corresponds to wavelengths from 1 millimeter to 10 centimeters.
The wave type with a frequency of 23808 GHz is in the microwave region of the electromagnetic spectrum. This frequency falls in the range of millimeter waves, which are often used in various applications such as wireless communication, radar systems, and imaging technologies.
GHz is Giga Hertz which is 1 billion cycles per second. Normally used as an electronic frequency in computers and radio wave transmissions.
MHz and GHz are a measure of frequency. In science frequency = 1/time for one cycle. If a wave takes 0.5 seconds to complete a wave, the frequency is 2 Hz. MHz and GHz in computers measure the same thing. It measures the frequency of the processor (ie, how many cycles it completes in a set time) again, if each cycles takes 0.5 seconds, then your computing speed is 2 Hz. a GHz (giga hertz) is equal to 1000 Mhz (mega hertz) a MHz is equal to 1,000,000 Hz. how is mhz and ghz is measured?
The wave length and frequency of course vary, the frequency ranges from 3kHz to 300 GHz. The wavelengths are longer than infrared.
Miclrowaves with a frequency of 2.5 Ghz. Interesting, isn't it?