Multiply by 2.03625437 to convert from psi to inches mercury.
Multiply by 0.49109777 to convert from inches mercury to psi.
The absolute pressure at 20 inches of mercury is approximately 10.3 psi (pounds per square inch). This is calculated by adding the atmospheric pressure (14.7 psi) to the gauge pressure or vacuum pressure (negative in this case) represented by the 20 inches of mercury column.
Psi (pounds per square inch) and inches of Hg (inches of mercury) are both units of pressure measurement. To convert between them, you can use the conversion factor that 1 psi is approximately equal to 2.036 inches of Hg. This conversion factor allows you to relate pressure values in psi to inches of Hg and vice versa.
There are 46.15 inches of water in a 20 psi pressure. This can be calculated using the formula: 1 psi = 2.307 feet of water, which is approximately 27.69 inches. 20 psi x 27.69 inches/psi = 46.15 inches.
35 inches of water is equivalent to approximately 1.27 psi. This can be calculated by dividing the height of the water column (35 inches) by the conversion factor (27.71 inches of water column per psi).
To convert inches of mercury to inches of water, you can use the conversion factor of 1 inch of mercury = 13.6 inches of water. Therefore, 29.92 inches of mercury is equal to 29.92 x 13.6 = 407.552 inches of water.
Inches of mercury x 0.4912 = psi
To convert psi to inches of mercury, multiply the psi value by 2.036. Therefore, 12.6 psi is equivalent to approximately 25.65 inches of mercury.
14.37 psi is 0.20317789 inches of mercury.
To convert psi to inches of mercury absolute, divide the psi value by 2.036. In this case, 57 psi divided by 2.036 is approximately 27.97 inches of mercury absolute.
30 inches of mercury = 14.73 psi (1 inch of mercury = 0.491 psi So, 30 x 0.491 = 14.73).
About 2 1 pound per square inch = 2.0362... inches of mercury
American units of air pressure include pounds per square inch (psi) and inches of mercury (inHg). These units are commonly used in weather reports and aviation to measure atmospheric pressure.
The absolute pressure at 20 inches of mercury is approximately 10.3 psi (pounds per square inch). This is calculated by adding the atmospheric pressure (14.7 psi) to the gauge pressure or vacuum pressure (negative in this case) represented by the 20 inches of mercury column.
29.0 pounds per square inch is about 59.05 inches of mercury.
Inches of mercury x 0.4912 equals psi
Psi (pounds per square inch) and inches of Hg (inches of mercury) are both units of pressure measurement. To convert between them, you can use the conversion factor that 1 psi is approximately equal to 2.036 inches of Hg. This conversion factor allows you to relate pressure values in psi to inches of Hg and vice versa.
The answer will depend on what it is that you wish to convert into PSI. You cannot. Inches are a linear measure, PSI (pounds per square inch) is a measure of pressure. The units are incompatible.