Size, shape, and density of particles all influence the rate of deposition. Larger particles settle faster due to gravity, while particles with irregular shapes may settle at varying rates. A higher particle density typically results in faster settling rates compared to particles with lower densities.
The force of acceleration (gravity) the drag (resistance which is a complex factor including shape, density, surface structure, viscosity of the medium through which the object is falling, etc. )
All else being equal, for the same material, the more dense it is (i.e. the less air it contains) the slower it will burn.There is no overall general rule relating density of different substances and their burn rate.
In general, heavier things will sink faster than lighter things in a fluid like water due to greater gravitational force. However, factors like shape, size, and density can also affect the rate at which objects sink.
yes in air or liquid. The shape determines the opposing force (friction) encountered. A flat object will fall in a tumbling manner, because the opposing force is mostly likely acting at a an angle to the fall and the angle is changing with the inclination of the object. Even a baseball will spin because of the unevenness of how friction acts on the surface facing down.
The factors that affect specific gravity include temperature, pressure, and the density of the substance being measured. Temperature changes can cause the volume of a substance to expand or contract, affecting its specific gravity. Pressure changes can also alter the density of a substance, impacting its specific gravity measurement.
The density dependent factor refers to the factors that affect the size or growth of a given population density. The factors also affect the mortality rate and the Birth Rate of a population. Some of the density dependent factors are disease, parasitism, availability of food and migration.
The rate of deposition refers to the speed at which particles settle out of a fluid onto a surface. It is usually measured in terms of mass or volume per unit area per unit time. Factors that can affect the rate of deposition include particle size, fluid velocity, and surface properties.
As the rate of flow decreases, the rate of deposition increases
YesYes
In electro deposition current density of bath means current per unit area of cathode.in which proportion rate depends on cathode to anode area?
The slope of land can affect the rate of deposition in a delta by influencing the speed of the river flow. A steeper slope can lead to faster river flow, carrying more sediment downstream, which can result in increased deposition. Conversely, a gentle slope may slow down river flow, allowing sediment to settle out more easily and potentially decrease deposition rates.
Yes; the dissolution rate is increased when a substance is as small particles.
In air, yes. In vacuum, no.
The rate of sediment deposition in quiet water is influenced by factors such as grain size, water velocity, sediment concentration, and water depth. Finer sediment particles settle more slowly than coarser particles. Lower water velocities allow sediments to settle out, while higher velocities keep them in suspension. A higher sediment concentration can lead to faster deposition rates, as can shallower water depths.
Low deposition rate in sputter deposition can be attributed to factors such as low sputter yield of the target material, insufficient power or pressure to sustain sputtering, inefficient target utilization, or poor target-substrate geometry leading to inefficient material transfer. Increasing any of these factors can help improve the deposition rate in sputter deposition.
A cube can only have one shape "cubic" - (someone has asked you a trick question). However, certainly the rate at which a piece of solid ice melts IS affect by its shape, the greater the surface area of the piece of ice, the faster it will melt.
colour is a physical property that has no effect on the rate of dissolving