A wave typically breaks when its wave base reaches the depth of half its wavelength. Therefore, for a wave with a wavelength of 3 meters, it would break when the water depth is approximately 1.5 meters. The distance from the shore at which this occurs depends on the slope of the seafloor.
The length of the rope would be half the wavelength of the standing wave, so in this case, the rope would be 5 meters long. This is because the fundamental frequency of the standing wave has one full wavelength, which corresponds to half the length of the rope.
To convert kilometers to square meters, you need to square the value. In this case, 160 km would be equal to 160,000,000 square meters.
You would measure the distance of the door with meters because liters measure volume not length.
15m would typically refer to 15 meters, which is a unit of length used in the metric system.
Wave breaking typically occurs when the water depth is approximately equal to or less than 1.3 times the wave height. Therefore, a wave with a 5 meters height would likely begin to break in water depths of around 3.85 meters or less.
Celsius
it would be .3
To find out how many lengths are in 750 meters, you need to specify the length of each segment. For example, if each length is 100 meters, then 750 meters would contain 7.5 lengths. If the length is 50 meters, then there would be 15 lengths in 750 meters. Please provide the specific length for an accurate calculation.
Length is measured in meters.Length is measured in meters.Length is measured in meters.Length is measured in meters.
The side length of a square with an area of 9 square meters would be 3 meters.
To find the area of a square, you square the length of one side. In this case, if the side length is 14 meters, you would calculate 14 meters x 14 meters = 196 square meters. So, 14 meters is equivalent to 196 square meters in terms of area.
Meters
The dimensions of a rectangle with an area of 400 square meters can vary, as multiple pairs of length and width can produce this area. For example, if the length is 20 meters, the width would be 20 meters (making it a square). Alternatively, if the length is 40 meters, the width would be 10 meters. Thus, any combination of length and width that multiplies to 400 will satisfy the area requirement.
Meters should be used to measure the length of a tennis court in metric units.
If you mean what units, that would be meters.
meters
The length of the playground is 135 centimeters